Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Articles by date
Articles by colliery
Personal name index
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious


 Newspaper Articles Index Newspaper Articles 

14th July 1928, Page: 404, Column: 1

Examination Questions

First Class or Colliery Managers.*

WINNING AND WORKING.

1. A seam of coal, 7 feet thick, and dipping 1 in 2½, is to be worked longwall. Discuss in detail the advantages and disadvantages of working the seam to the rise, i.e., with the face parallel with the strike-with the roads on the rise and dip-and, working the face on rise and dip, with the roads on the level. Illustrate your answer with sketches showing a small district worked on each system. (50)

2. Place the following formations in correct geological sequence: Old Red Sandstone—Chalk—Magnesian Limestone—Great Oolite— Silurian—Mountain Limestone—Coal Measures. (40)

3. What is meant by "crumps," "bumps" or "goths" which are experienced in the working of certain seams? Under what conditions are these happenings likely to occur? (40)

4. An upcast shaft, 13 feet diameter, lined with brickwork, is to be enlarged to 20 feet diameter. The shaft is not required for winding purposes whilst the work is in progress. Explain the method you would adopt. (40)

5. A heavy fall has occurred on a roadway where the strata are of soft material, and there is also side pressure. Describe, with sketches, how you would proceed to clear away the fall, and the form of supports you would put in. Give reasons for your answer. (40)

6. State fully the procedure in blasting down coal on a longwall face after it has been undercut by a coal-cutting machine. (40)

7. Describe the two kinds of drill rods used in connection with hammer drills for boring shot-holes. Which is used for rise holes and which for steep dip holes, and why? Which makes the most dust in use, and why? (40)

THEORY AND PRACTICE OF VENTILATION.

1. On the plan which accompanies this paper show how you would ventilate the mine. Show the direction of each air-current and the positions of air-crossings, doors, stoppings, regulators, and sheets; and distinguish between intake and return air ways. (50)

2. Show, by sketches, what arrangements you would make, at the surface, to ventilate a large mine, where the upcast and downcast shafts are 40 yards apart; and give a description of the plant. State how you would comply with the requirement for reversing the air-current when required. (30)

3. A mine fan produces a current of 200,000 cubic feet per minute at a water-gauge of 2 inches. Calculate the horse-power of ventilation. Assuming the horse-power of ventilation to be 60 per cent, of the energy imparted to the fan shaft by the driving motor, state what quantity of air you would expect if this imparted energy were doubled, the mine being otherwise unaltered. (30)

4. Owing to the gradual extension of the workings, the ventilation of a mine is found to be barely satisfactory at times. State, as fully as you can, what investigations you would make, and what results you would anticipate from each of these investigations. State what steps you would take to improve matters. (30)

5. What is meant by "Coefficient of friction" in mine ventilation? On what conditions does its magnitude chiefly depend; and how can it be increased or diminished? If it is altered, what is the effect on the ventilating current ? (30)

6. Show, by sketches, in plan and elevation, the construction of an air-crossing, giving the details, and direction of travel of the air. Enumerate the various types of air-crossing, and state under what circumstances you would use each of them. What defects are liable to develop, and how would you guard against their occurrence? (30)

7. Describe an electric safety-lamp, and a flame safety-lamp; and give the advantages and disadvantages of each. State any recent development in in-bye lighting in fiery mines, (30)

EXPLOSIONS, ETC.

1. Owing to an explosion and subsequent fire, a section of workings in a fiery mine has been sealed off. Outline the considerations which should be given to the task of re-opening the section, and state how you would proceed. (30)

2. A vertical shaft, 14 feet in diameter, is about to be abandoned; the lower seams, which are dry, are to be worked from another shaft, and it is necessary to prevent water from the upper seams passing down. Sketch and describe the construction of a suitable dam, between the upper and the lower seams, to withstand the pressure of 120 yards head of water. (25)

3. A heading, 7 feet wide by 6 feet high, with the necessary boreholes, is being driven towards old workings containing water at a pressure of 200 lb. per square inch. Make a sketch, with dimensions, of a pair of emergency or shut-off doors, showing how they should be erected so as to enable a main dam to be completed in the event of an unforeseen inrush of water. (25)

4. Sketch a section of a seam of coal which you suspect is liable to spontaneous combustion. Make a sketch plan of a small district of workings suitable for the seam, and explain the special features of your proposed method of working. (25)

5. What are the causes of high temperature in deep mines? What is the depth, and what is the temperature, of the deepest workings in British mines ? What steps can be taken to reduce such high temperatures ? (25)

6. You have reason to suspect carbon monoxide in the air underground; how would you test for dangerous percentages? What would be the effect of breathing: (a) 0.01 per cent. of CO; (b) 0.10 per cent. of CO (c) 1.00 per cent, of CO ? (25)

MACHINERY.

1. An alternator delivers in electric power 90 per cent, of the power used to drive it. How is the lost 10 per cent, accounted for? How may the efficiency of an alternator be ascertained? (28)

2. In connection with electric power: (a) How can you obtain 3-phase 50-cycle alternating current at 400 volts from 3-phase 50-cycle current at 3,300 volts? (b) How can you obtain direct current at 440 volts from 3-phase 50-cycle alternating current at 3,300 volts? (c) How can you obtain 25-cycle current from 50-cycle current, both being 3-phase at, say, 660 volts? Describe in a few words each type of plant that you mention. (28)

3. Describe a 3-phase induction motor suitable for driving, through gearing, a 3-throw pump that starts up under full load torque (say, 100 h.h.p., 400 volts, 50 cycles). If the synchronous speed is 750 r.p.m., what may the actual speed be at full load?

4. Briefly describe a coal-cutting machine operated by electric power suitable for driving a heading 12 to 15 feet wide. Describe in detail the arrangements for transporting the machine from heading to heading. (28)

5. Make an outline drawing or drawings of an air receiver, to contain approximately the air delivered in five minutes by an air compressor inhaling 500 cubic feet per minute of free air, and compressing to 85 lb. per square inch gauge pressure (ignore temperature changes). Show the leading dimensions. Indicate in their correct positions the fittings and mountings and the inlet and outlet branches for the air. (38)

6. Write a short essay on a steel-wire winding rope, dealing with its construction, calculation of size, testing, treatment in use, life to be expected, and accidents to which it is liable. (28)

7. Name the four materials, A to D, whose analyses are given below, and state for what purposes these materials are useful about a colliery.

(28)

8. State approximately the quantity per minute of compressed air, measured as free air, used for running: (a) A chain coal-cutting machine; (b) an air hammer drill of medium weight; and (c) a mechanical pick. What will be the volume of 100 cubic feet of air measured at atmospheric pressure and 60° Fahr. when compressed to 90 lb. per square inch gauge pressure at 200° Fahr. (atmospheric pressure, 15 lb. per square inch). (28)

SURVEYING, LEVELLING AND DRAWING.

1. The co-ordinates of five points A, B, C, D and E, forming a closed area, are: A, S 450, W 132 links; B, S 118, B 138 links; C, N 726, W 217 links; D, N 360, B 683 links; B, S 768, E 523 links. Lay down the positions of these points to a scale of 1 inch to 132 feet and measure the enclosed area A, B, C, D and E. (30)

2. The accompanying plan shows spot levels. Draw, on the plan, contour lines on a level of 65 feet, and at each 5 feet vertically above that level. (25)

3. Draw, in your answer book, a section along the line from A to B on plan referred to in Question 2, to a scale of 1 inch to 100 feet for horizontals, and 1 inch to 10 feet for verticals. What is the average gradient from A to B reduced to a uniform slope? (30)

4. The length of a section of the inner rail on a curved tram road of 15 feet radius is 9½ feet. What is the length of the corresponding section of the outer rail when the gauge of the road is 20 inches? (25)

5. Describe, shortly, how you would take the levels required by statute to be shown on a mine plan, assuming a dip of about 1 in 4, and that the workings extend 400 yards, on plan, to the dip of the shaft bottom. What instruments would you use? Say what tests you would apply to them, without giving details of how the tests would be made, except in the case of any one test you may select for your answer. (30)

6. Construct a scale of , showing links. Figure the scale so that any distance up to 300 links can be taken off by one setting of dividers. Take your starting length from your scale or foot rule. (25)

GENERAL MANAGEMENT AND MINING LEGISLATION.

1. As manager of a colliery you are instructed by your directors to organise a system for the requisitioning, buying, and distributing of stores and materials. Submit, in the form of a report, such a scheme, including the organisation necessary to inform you monthly of the cost, per ton of output, of stores and materials. How would you ensure an adequate, but not excessive, stock being always available for use? (30)

2. Describe the provisions and principal changes brought about by one of the following, which came into force on January 1st, 1928: (1) The Coal Mines General Regulations (Safety Lamps), 1927, Order, dated 9th December, 1927 (2) the Safety Lamps (Relighting) Order of 1927, dated 9th December, 1927. (25)

3. What provision is made in the Coal Mines Act, 1911, for the prohibition of the use of dangerous machinery? (25)

4. At what mines are rescue brigades required to be provided? What mines may be exempted from the regulations? Where rescue brigades have to be provided, what is the proportion of brigades required in relation to the number of persons employed? (25)

5. Give a summary of the section of the Coal Mines Act, 1911 (Sec. 50), relating to steam boilers. (25)

6. What are the various notices required to be officially given by the manager of a mine, and state to whom they are to be given? (25)


* Questions set at Examinations in May, 1928. The figures in brackets against each question indicate the maximum number of marks obtainable. The plans and sketches have not been reproduced. Complete sets of questions available through H.M. Stationery Office, 1s. 6d. net.


Related Articles

Pub.
Date
Article (Newspaper)
10 Mar 1928  Board for Mining Examinations (The Science and Art of Mining)
14 Jul 1928  Examination Questions, First Class or Colliery Managers.* (The Science and Art of Mining)
28 Jul 1928  Examination Questions, Second Class or Under-managers.* (The Science and Art of Mining)
28 Jul 1928  Examination Questions, Surveyors.* (The Science and Art of Mining)
11 Aug 1928  Examination Results (The Science and Art of Mining)
25 Aug 1928  Notes On Surveyors' Examination, Central Examiner's Report (The Science and Art of Mining)
15 Dec 1928  May (1928) Examinations (The Science and Art of Mining)

 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 28 Nov 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print