30th June 1928, Page: 395, Column: 2
Telescopic Steel Prop
As announced in the "Wigan Observer," Mr. Enoch Bullough, of
61, Old Road, Ashton-in-Makerfield, Wigan, has taken out a patent for a
telescopic steel prop. The illustration shows the steel prop along with a
timber pit prop. This telescopic pit prop, it is claimed, will carry a load of
26 tons from end to end, whereas the old timber prop now generally used breaks
with an average load of 7 tons.
Mr. Bullough took out patent rights in November last for his telescopic
pit prop, which has taken a University certificate of test for end to end load
of 26 tons. The advantages claimed for this pit prop over the present-day wood
or timber prop are many, and include : (1) The life of the telescopic pit prop
is in years ; (2) its strength is definitely known ; (3) it can be withdrawn
with ease ; (4) it can be put back to work with very little adjustment; (5) it
can be lengthened or shortened to suit requirements ; (6) it will give before
collapsing load is reached ; (7) it can be adjusted for any known tonnage ; (8)
it is worked on the cheapest mechanical principle known, sand being employed in
the compression chamber ; and (9) it is the cheapest steel pit prop with
efficiency, and should win the confidence of all.
The telescopic pit prop is composed of six pieces of steel, two being pieces of
tubular steel, one steel cap, one steel conical piece, one steel disc, and a
piece of flexible steel wire. The lower member is of tubular steel from two to
six times as long as the upper member, which is also of tubular steel to fit or
telescope into the other. On the top of the lower member fits the conical
piece. The diameter of this cone depends on the tonnage required. The steel
disc fits under this to regulate the release of sand in the compression
chamber. On the top of this chamber fits the cap. A little lower down is a hole
through which the steel wire goes. This wire does two actions at once. When the
prop is required to be withdrawn, it releases the compression, and also
withdraws the prop at the same time. Nothing in the shape of tools is required
to put the prop into position or withdraw it.
This telescopic pit prop, it is said, has won the confidence and praise of all
engineers and managers to whom it has been submitted for examination.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Bullough, Enoch | | | |