30th June 1928, Page: 385, Column: 2
Oil From Coal in Diesel Engines
Mr. J. S. Brown, in the "Journal" of the Royal Technical
College, Glasgow, publishes the performance of a Diesel engine when three oils
obtained from coal by low-temperature carbonisation processes were used as
fuel. In each case the engine was worked up to full load and normal jacket
temperature on a normal petroleum oil, and the fuel was then gradually changed
to that under test. In one case excessive viscosity caused an airlock in the
feed, but the performance on the other two oils was entirely satisfactory with
the engine under full load. In the case of one oil only was it possible to
avoid pre-ignition when the engine was running at no load. In neither case was
it possible to start the engine without preheating the jackets. Two of the
three oils gave a small amount of deposit when mixed with Shell-Mex Diesel
grade oil. These oils the author considers preferable to the creosote oils
previously obtained from coal, and in his opinion a little further improvement
in the quality would give them all the properties of a petroleum oil.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Brown, J. S. | | | |