|
16th June 1928, Page: 377, Column: 2 Failure In Wire RopesAt the May meeting of the Midland Institute of Mining Engineers, in continuation of the discussion on the paper on "Some Causes of Failure in Wire Mining Ropes," Mr. H. M. Hudspeth, H.M.I.M., said he thought it would interest members to know something of the number of breakages reported in the Yorkshire Division — winding ropes only. Since the coming into force of the 1911 Act, 35 cases of broken rope were reported up to the end of 1927, during which period approximately 605 million tons of coal were wound and men lowered and raised, the latter figure being based on an output of one ton per man per shift. These figures not only showed how well ropes were made, but surely also what care was exercised in their use. Fortunately, in the vast majority of cases, the breakages occurred when men were not being raised or lowered, and, in fact, only in one instance were persons involved, and only one man was killed. The rope in question was a fiat steel one which had been in use for some years at a shaft to which the C.M.A. probably did not apply. Evidence did not point to the "under" rope failing more often than the "over" rope ; in fact, the reverse was the case, the figures being slightly in favour of the "under" rope. Of the 35 cases, they had information in respect of 34. Fifteen were "under" ropes, and 19 "over" ropes. This, of course, might be due to the fact that the working life of the "under" rope was less than that of the "over" rope-they took the bottom rope off first. It was difficult to make an analysis of the causes of breakages, but it was interesting to note that where the breakages had occurred 19 of them were at or very near the capel.
|
|||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||