Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Articles by date
Articles by colliery
Personal name index
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious


 Newspaper Articles Index Newspaper Articles 

16th June 1928, Page: 373, Column: 1

Problem Of Heat At Depth

Before the South African Institution of Engineers a paper has been presented by Dr. J. H. Dobson on "A Review of the Engineering Aspect of Improving Temperature and Humidity Conditions of Mine Atmospheres at Great Depths." Contributing in the journal to the discussion, Messrs. O. Tillard and E. C. Ransom, having delved into the problem on the Village Deep, say that to obtain the greatest benefit from the circulation of air underground, where steadily increasing rock temperatures are being encountered, there are three essentials, namely : (a) Maximum quantity ; (b) Concentration in the bottom levels before distribution ; (c) Perfect control.

(a) Mines classed as ultra deeps should be provided with a ventilating plant of maximum capacity. It is undoubtedly good practice to maintain maximum air movement "during the process of reaching greater depths" by which means the mine is being cooled off as it goes down, which, no doubt, would insure better conditions at great depths than if the problem is faced when it really becomes acute.

(b) By concentration of air in the lower levels of the mine before allowing it to break away, we are overcoming to the greatest extent the ever-increasing rock temperatures, and cooling off as rapidly as possible an area where work will eventually be concentrated.

(c) Air control is the art of mine ventilation, coursing it where it is wanted, and obtaining the maximum benefit from the air at one's disposal. The lay-out of a mine has a great deal to do with effective ventilation control. The present practice of footwall development in some deep level mines is going to play an important part in improving working conditions at depth. Where all development is on reef it is a very difficult matter indeed to maintain the necessary control to give the required cooling rates by air movement. By concentrating the air as much as possible we maintain maximum velocity and expose it to a minimum area of heat radiating rock surface, each of which plays a very important part in the degree to which the air is heated. The degree to which air is heated in passing through the workings of a mine depends to a very great extent upon the speed at which it is travelling. Stagnant air very soon assumes the temperature of the rock walls, and as movement is increased, so is the temperature of the air delivered decreased.

Atmospheric conditions on the surface have quite a marked effect on the temperature of the intake air. On the Witwatersrand during the summer period it is not uncommon to have a prolonged spell of hot, muggy weather. This condition on the surface, giving a comparatively small wet bulb depression, has a most detrimental effect on the temperature of the intake air underground; in fact, at times it more than counterbalances the beneficial effect of the increased air movement on temperature, with air of normal evaporative capacity on the surface. Fortunately, during the greater period of the year on these fields the air on the surface is wonderfully dry, has great evaporative capacity and does not nullify to any great extent the anticipated temperature reduction by increased air movement. At the same time, the critical period underground on the ultra-deep mine, even when equipped with maximum fan capacity, is during a hot damp spell on the surface. By increasing air movement two most important agents are exploited as far as improvement in cooling rates are concerned, namely, temperature reduction and increased velocity.

Other methods dealt with by Messrs. Tillard and Ransom were: Air refrigeration on the surface or underground; cooling the compressed air supply ; cooling the mine water supply ; air drying underground by dehydrating agents, and increasing the evaporative power of the air by a modification of the present working methods. Regarding the latter they say that evaporation of moisture is the greatest cooling agent we can have in hot mines, so that any practice which tends to reduce the moisture content of the air in traversing the mine without producing other deleterious effects must command attention. Where cooling effect is most essential in the deep level mines is right at the working faces where men are working and perspiring. As much evaporative power as possible should be retained by keeping the air as dry as possible in the approaches to these working faces.

Moving air at relatively low temperatures and saturated with moisture chills or cools to a greater extent than dry air at low temperatures, owing to water being a much better conductor than air. With air at high temperatures there is very little cooling effect from radiation and convection, and much depends upon the evaporative capacity of the air for dissipating body heat. By spraying water, for instance, into the warm air traversing these deep level mines, the dry bulb temperature is decreased, but the more important wet bulb is increased and the cooling agent, namely, evaporation, upon which we are greatly dependent, is to a large extent destroyed. In considering ways and means of reducing the moisture content of the air, so as to give increased cooling effect by evaporation, without increasing the dust content of the air, it is necessary to examine the whole question of water application in dust allaying underground.

Water, Messrs. Tillard and Ransom proceed to say, is our dust allaying agent underground. The only places where dust can be allayed or diminished are where it is created or made, and these may be enumerated as follows :— (1) At the point of the drill during drilling operations ; (2) During "lashing" operations ; (3) By moving rock in ore-passes ; (4) During blasting operations.

(1) During drilling operations the usual procedure is to pass water down the drill to the cutting edge. The use of water during this operation, no doubt, does good work.

(2) All loose rock before being moved must be thoroughly wetted. The application of water to rock which is being moved or shovelled from place to place is, no doubt, essential and does good work.

(3) The application of water to rock traversing ore-passes might have a beneficial effect on the dust created. It might be mentioned that it is good practice to have, in addition, suitable means of drawing the dust away from these places and passing it through a dust trap, or, better still, to bye-pass it direct to the return, and clear of the working places.

(4) The dangerous dust created during blasting operations is carried away from the working places by the ventilating current after the men are out of such places and before the next working shift commences. The larger particles of dust created during blasting settle on the walls and timber in the workings ; they are stationary and, therefore, innocuous if left alone.

In concluding, Messrs. Tillard and Ransom express the opinion that at the present depth probably more benefit is to be derived from the full exploitation of air movement than from any other source, and, as previously stated, to obtain this there are three essentials, namely :— (a) A plant of maximum capacity; (b) Concentration in the bottom levels before splitting; (c) Perfect air control throughout the mine. At the same time it Would help matters considerably if the air could be delivered at the working places a little drier by cutting down the use of water in the approaches.


Names mentioned in this article

 

 Name  Age  Occupation  Notes 
Dobson, J. H., Dr.      
Ransom, E. C.      
Tillard, O.      


 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 28 Nov 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print