|
16th June 1928, Page: 369, Column: 1 Explosives In Coal MinesIn the 52nd annual report of H.M. Inspectors of Explosives for 1927 reference is made to the issue of five Orders under Section 61 of the Coal Mines Act, 1911, and under the provisions of the Mining industries Act, 1920: The effect of four of these Orders was to add the following 11 explosive's to the Permitted List: Afror Tyne Powder, Antifrost Gelammonite No. 1, Antifrost Penrhyn Powder, Eversoft Plastex, Eversoft Tees Powder, Eversoft Seamex, Haswelite, Hawkite No. 3, Polar Rex, Polar Saxonite, and Polar Super Cliffite. The explosives Driftex, Plastex and Cambrite No. 3 were removed from the list. Of the 11 explosives added, nine were of the low-freezing type. An Order dated November 11th extended the period during which the non-detonating explosives named in the Schedule to the Order of September 1, 1913, are included in the term "permitted explosives" to December 31, 1931. Nine explosives were submitted for test during the year, six of which passed and three failed to pass. Of those which passed the test three have been published in Coal Mines Orders While three remained to be published in 1928. There were five ignitions of firedamp during the year due to the use of permitted explosives in collieries! viz. :— (1) At Wheldale, Yorkshire, on February 4, with Samsonite No. 3 ; (2) at Carriden, Linlithgow, on January 8, with Samsonite No. 3 ; (3) at Shalston, West Yorkshire, on March 3, with Roburito No. 4 ; (4) at Risehow, Cumberland, on June 27, with Samsonite No. 3, and (5) at Lyme, Lancashire, on October 17, with Hawkite No. 1. The first and second of these ignitions were thought to have been probably due to fissure or cavities at the back of the shot hole ; the third to an overcharged shot lighting gas in a cavity formed by a previous shot; the fourth to an overcharged and improperly-placed shot in the presence of firedamp ; and the fifth to an over-charged shot in the presence of a parting between the coal and "ley" dirt and the roof. Helping the Shot-firer. Replying to some of the points raised in the discussion of his paper on "The Safe Use of Coal Mining Explosives," Dr. W. Payman, at the May meeting of the Midland Institute of Mining Engineers, said that what they wanted to do now was to try to give the shot-firer some help, so that he might be able to fire his explosives in such a way that, when he was up against unusual conditions, he could overcome even the slight risk that remained to-day when he did his best. Most of the explosions in recent years had occurred when there had been a fissure or a crack in or near the shot-hole. That was one of the problems to which they had been directed by practical experience, and which they hoped to tackle in order to find out some method, if they could, of preventing an explosion occurring when such a crack was quite undetectable by any means which even the careful shot-firer could use. All they did know now was that any Permitted explosive could cause the ignition of firedamp, and it was the duty of the shot-firer to do his best to prevent that happening ; and they thought their work would help him to do that. As to whether, in the particular case of the Permitted explosive, they had gone too far in adding cooling salts, he personally would like to say that they had gone too far in that direction because of the great number of missfires that they got. By missfires he included such things as failure to detonate, and that was what one always came up against when considering the official test. He thought they could definitely put down, to the addition of cooling salts or the substitution of high explosive by a cooling agent, the increased number of missfires that they got with Permitted explosives. But whether the Permitted explosive did actually in practice give rise to more missfires than the non-Permitted explosive he would not like to say, because he did not think there were any statistics on the point. The question of pooling in order to increase the permitted strength of an explosive seemed rather important, because if they looked through the Permitted List in England, in America, or in Germany, they found that there were explosives on the list of identical compositions, and yet from reports their safety, as judged by the test, was quite different. It was evident to him that if that was so — if they got explosives with the same amount of cooling salt in them to make them safe, and yet their safeties were quite different — then there were other methods by which they could make their explosives safer, and those were the methods, he thought, which ought to be encouraged. Prof. Ritson had given some practical instances of why the detonator was best in front under actual working conditions. His, Dr. Payman's, own feeling about it now was that it was better to put the detonator into one end of the cartridge. He thought they could say definitely that if they wanted to prevent missfires then, without doubt, the best method was to put the detonator into one end of the charge.
|
|||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||