Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Articles by date
Articles by colliery
Personal name index
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious


 Newspaper Articles Index Newspaper Articles 

2nd June 1928, Page: 355, Column: 1

Inspection Of Electric Motors

Readers of this journal in past years have found much material of interest and usefulness in the Sheffield University Mining Magazine, which constitutes the journal of the Midland Junior Mining Engineers' Society. We have before us a copy of the current issue (March, 1928), and examination of its 40-50 pages of text and illustrations confirms earlier impressions, the value of the Magazine being well maintained. The price is 1s., by post 1s. 1½d. Readers who wish to secure a copy should apply to Mr. J. Sinclair, Business Editor, at the Department of Applied Science, St. George's Square, Sheffield. Contributions to which attention may be directed include "Proved Coal Seams in the Eastward Extension of the Yorkshire Coalfield," by Professor W. G. Fearnsides, M.A., F.G.S. ; "Modern Banking and Surface Tub Control," by H. E. Collins, B.Eng. (Mining) ; "A Few Notes on the Maintenance of Electrical Machinery," by A. R. Cooper, A.M.I.E.E. ; "Some Aspects of Coal Marketing," being the Presidential address before the Midland Junior Mining Engineers' Society; "The Use of Explosives in South Africa," by Dr. Wm. Cullin ; "A Few Notes on the Care and Maintenance of Wire Ropes," by H. E. Collins ; and "Mining Tour of Scottish Coalfields." From the article contributed by Mr. Cooper we make the following extracts :—

One of the first things to examine when inspecting an electric motor is the air gap. The size of the gap on a stationary motor can be obtained by inserting feelers or, if the motor is at work, a good approximation can be made by having an electric lamp held level with the gap at one side of the motor whilst the inspector sights through the gap at the other side. As the bearings wear the gap below the rotor decreases, and unless attention is given the rotor will begin to rub on the stator and trouble will develop. Some motors are fitted with adjusting studs on the end shields so that as the bearings wear the end shields as a whole can be lifted to keep the air gap at its normal value — but expedients of this nature should only be resorted to as temporary measures, and the motor should be fitted with new bearings at the first opportunity. The minimum size of the air gap allowable will depend upon the size of the motor and the normal size of the air gap, but it is good practice to tabulate a series of minimum clearances for each size of motor and to insist that every machine shall receive attention as it approaches its limiting value. The motor bearings are a very fruitful source of trouble, and a little time spent on their inspection is often amply repaid. Smaller motors are fitted with solid brass bearings usually with one oil ring, whilst the larger machines have split cast-iron bearings lined with anti-friction metal and fitted with two or three oil rings.

Trouble can result from a number of causes. If dust is allowed to collect in the oil wells the oil becomes so thick that the oil rings will not turn, the supply of lubricant to the journal ceases, the bearing heats up and, if not attended to, seizes. To avoid trouble of this nature the bearings should, if possible, be fitted with dust shields and the oil should be changed regularly. It is not sufficient that the oil wells should simply be filled up every week, for in many cases the oil well overflow pipes become choked with sediment, and if the attendant decides to continue feeding oil until the overflow shows an excess he will probably flood the bearing and cover the motor windings with oil. The overflow pipes should always be kept clear and the oil should be poured in slowly, in small quantities, as the oil requires some little time to rise in the overflow pipe to its correct level. Periodically the end shields should be removed so that the oil wells can be thoroughly cleaned out, care being taken that no small pieces of waste are left inside.

A good deal of trouble can be given by a bearing if the motor has a high-speed pinion drive and the bearing is at all loose in its housing; continual chattering will result, it is probable that the oil rings will refuse to turn, and the anti-friction metal may be cracked. Sometimes an attempt is made to check this by tightening down the locking stud on top of the bearing, but this method is obviously the wrong one, as the function of the stud is simply to prevent rotation of the bearing and not to bolt it rigidly to the housing; in fact the end of the stud should not reach the bottom of the recess, and it is advisable to make the stud of such a length that when it is screwed down to the top of its thread it will not quite reach the bottom of the recess in the bearing. A stud which is too long can be screwed down on to the bearing with sufficient force to distort it; in fact cases have been known where the bearing shell has been cracked by applying excessive pressure on to locking studs which have been made too long.

The bushgear should next receive careful attention, and if the slip rings or the commutator are badly burned or scored and heavy sparking is taking place the faces can be ground up, in position, and even while at work, by one of the many excellent types of slip-ring grinders which are now on the market.

Another item which does not often receive the attention it deserves is the carbon brush. Care should be taken to ensure that the copper pigtails on the brushes are correctly and securely fastened to the brush-holder and also that the faces of the brushes are evenly bedded on to their wearing surfaces. Glass paper can be slipped under the brushes and pulled backwards and forwards over the rings or the commutator to get a good surface on the brushes, but emery paper must on no account be used.

Assuming that the air gap, the bearings and the brushes are in proper working order and the motor is running without excessive heating, the earthing bonds should be examined. The best time to test the efficiency of the earthing system is when the plant is at rest. The old-fashioned method of testing was to couple the earth lead in series with a battery and a small lamp, and if a current was established it was assumed to be satisfactory. Obviously this method is unsound, for the circuit could be completed by a tiny strand of wire big enough to light the lamp but not nearly large enough to carry an appreciable earthing current, and as the C.M.A. states definitely that the conductivity of the earth lead should be at least 50 per cent. of that of the largest conductor, more efficient testing apparatus has to be used. An instrument which has become very popular is Evershed's "Ducter" for measuring low resistances.

When motors are being overhauled it is a good plan to blow them out with some form of electric blower which will remove the dust from the interstices of the windings and the laminations. If compressed air is used for this purpose care should be taken to see that the air is properly dried as the moisture which collects in compressed air mains may be blown on to the windings and cause a good deal of trouble.


Names mentioned in this article

 

 Name  Age  Occupation  Notes 
Collins, Henry Edward      Whos Who Page
Cooper, A. R.      
Cullin, William, Dr.      
Fearnsides, W. G., Prof.      
Sinclair, J.      


 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 28 Nov 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print