5th May 1928, Page: 321, Column: 1
Some Impressions Of Canadian Mining
At meetings of the Chemical, Metallurgical and Mining Society of South Africa,
Professor G. H. Stanley has been giving his impressions of the Empire
Mining Congress, which are reproduced in the Society's journal. One thing that
impressed him very much was the full way in which the Canadian mining industry
seems to take advantage of all natural opportunities that present themselves.
Among these it seemed to him that one very big advantage which it enjoys is
owing to the fact that Canada is already established as a manufacturing and
industrial country. In addition to that, Canadians have the resources of the
United States just across the border, and owing to these conditions they do not
have to wait so long to get delivery of their machines and mining supplies.
This Professor recalled that at Hamilton there is a very well equipped steel
plant with two blast furnaces, and eleven open hearth steel furnaces, where
they produce a variety of steel products. The capacity is about 300,000 tons of
steel ingots per year, turned out in various forms, i.e., 260,000 tons blooms,
billets and sheet bar ; 160,000 tons hot rolled products, including 90,000 tons
wire rods, 45,000 tons merchant bars, bolt nuts and spike rods, light sections,
agricultural implement shapes, etc. The Professor added : "The chief point
for comment, however, is that none of it was produced from Canadian raw
material. The iron ore and the coal were imported from the United States, the
latter being caked at the plant. We are always being told here that we cannot
run an iron industry although we have the iron and coal on the spot. Well, in
Canada they manage to run an iron and steel industry quite successfully
although they import practically all the raw materials from the United States.
Bearing that in mind, perhaps the doubts that are entertained as to the future
of the iron and steel industry in South Africa may at any rate be somewhat
modified."
Professor Stanley, whose running comments on the tour were intended to
give a bird's-eye of the things seen, said that after leaving the Porcupine
district the members of the Congress traversed forest and prairie country for a
long distance before reaching the scene of further mining activities, at
Estevan in Southern Saskatchewan, where there are large deposits of coal, or
rather, lignite. This is extensively mined and used in the district as it
occurs, but the question of briquetting it has of late years become important.
Lignite is a fuel containing a large amount of water, and hence of low
calorific value, and another difficulty is that it has a tendency to break up
in the course of time and become a valueless powder. Therefore, in order to
enable it to be transported to greater distances and a wider use to be made of
it it was decided to give briquetting a trial. It was felt that in view of the
tremendous amount of lignite available the matter was a national one, and the
Dominion Government, as well as the Provincial Government, put up the funds in
order to establish an experimental briquetting plant which the tourists were
conducted over. The essence of the scheme adopted is to crush the material
coarsely, and pass it through a drying plant which reduces water from 33 to 4
per cent., and through retorts which remove practically all combined water and
leave a carbonaceous residue. This is then mixed in pug mills with pitch while
hot and briquetted between rollers with corresponding depressions which turn
out an egg-shaped product weighing about two ounces each, fairly strong, and
calculated to stand transport. The plant as it stood was not then on a
commercial basis. It was more or less of an experiment, but it was thought the
results obtained were sufficiently encouraging for an outside financial concern
to take over and run the plant as a commercial proposition.
Professor Stanley mentioned here two points in connection with Canadian
coal mining that interested him very greatly. One was the peculiar system they
have of transporting the coal, which is mainly effected in what they call
box-cars, somewhat similar to what in South Africa they should describe as
cattle trucks, but completely closed. There is a roof to them and a big door on
each side, yet they manage to get these trucks filled with coal. In the old
days it was done by hand, but now mechanical systems are in use. One is a
travelling main and cross-belt arrangement which loads them to about
four-fifths capacity by causing the belt to throw the coal first to one end and
then to the other. Another arrangement tilts the car bodily so that the coal
running in from a shoot fills one end and is then secured in place by cross
timbers, after which the car is tilted the other way and filling completed. The
Professor asked why open trucks were not used, and the reply was that the coal
had to be transported very long distances. During the winter months the weather
was very cold, and the result if open trucks Were used would be that a truck
which left the mine full of coal might not have very much coal left in it when
it reached its destination ! Another feature was that they did not load any
coal over about five inches. It appeared that large coal was mainly used for
locomotives, and the Professor was given to understand that if they loaded coal
over that size the firemen simply threw it overboard.
Travelling further west the tourists came to the Lethbridge coalfield in
Southern Alberta, and visited the Galt mine. The coal here is of a
sub-bituminous character and occurs in a seam about 4 feet thick in Upper
Cretaceous rocks. It contains 50 per cent. fixed carbon, 9 per cent. ash and .6
per cent. sulphur. Preparation for market consists in screening first over
¾-inch bar screens to take out slack, then over 1½-inch bar screens
and on to picking belts where waste is removed. Finally, it is screened over
shaking screens with 3-inch and 4-inch perforations, for stove and egg coal
respectively. The coal passing the ¾- and 1½-inch bar screens is
separated by shaking screens into slack, pea and stove size, that passing the
3-inch apertures is also screened by shaking screens into slack and stove coal.
The stove and egg coal is lastly passed through spiral separators and over
picking tables.
Further west the Congress members came to the Crow's Nest Pass coal district.
Here the coal is of Lower Cretaceous age and the seams range from 4 to 20 feet
in thickness. It is of high bituminous quality and much of it is good coking
coal. Fixed carbon was about 70 to 74 per cent., ash 5 to 10 per cent., and
sulphur .4 to .9 per cent. The Professor was particularly interested in the
pneumatic coal cleaning machines at the West Canadian Collieries Bellevue mine.
These consist of inclined perforated shaking tables over which the small coal
is fed. During its passage air is forced by a fan through the perforation, and
this in conjunction with the agitation causes stratification of the coal into
light and heavy layers — clean coal and waste respectively.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Stanley, G. H., Prof. | | | |