7th April 1928, Page: 289, Column: 2
Combustion of Coal
In a paper on "The Combustion of Powdered Coal" before the London
Institution of Chemical Engineers, Mr. Burrows Moore, Ph.D., said the
combustion of coal may be apparent as several different phases, which may be
roughly described as : (1) Invisible combustion. (2) Combustion accompanied by
the appearance of smoke but otherwise invisible. (3) Visible combustion as
indicated by a glow. In all cases the combustion process is essentially one
which involves the oxidation and decomposition of the coal, the oxidation of
its volatile distillation products and of the solid residue. This process is
accompanied by endothermic and exothermic reactions, which determine the
resultant thermal value of the enemies! changes which are involved. The
physical structure, and the porosity of the coal, and in the case of broken
coal the size of the lumps and of the particles, will be of importance, because
these factors determine largely the surface area of the fuel, the time of
contact between the fuel and the reacting gases, and the ease with which the
gases may react with the fuel. The inorganic constituents of coal which have
been considered and must be regarded still from many aspects as incombustible
material, have recently been recognised as exerting a definite influence on the
decomposition and oxidation of coal. It is now recognised that powders to be
used for boiler firing and metallurgical purposes should conform to a rough
grade of fineness — usually 85 per cent. by weight to pass through a 200
mesh sieve and not more than 5 per cent. to be retained on a 100 mesh sieve.
For cement burning, when high volatile matter coal is used, a grade of fineness
— 90 per cent. by weight through a 100 mesh sieve — is sometimes
employed.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Moore, Burrows | | | |