Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Articles by date
Articles by colliery
Personal name index
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious


 Newspaper Articles Index Newspaper Articles 

28th January 1928, Page: 215, Column: 1

Examination Questions

Surveyors.*

FIRST PAPER — MORNING SESSION.

1. Plan No. 1 shows a series of contour lines, the positions of three boreholes, the level of the surface at the mouth of each borehole, and the depths of the boreholes respectively to a certain coal seam. Workings are not to be carried nearer to the outcrop than 100 feet on plan. Transfer the plan to your answer book and mark the limit of working towards the outcrop between the lines AB and CD. Assume thickness of drift to be 20 feet. (12)

2. Plan No. 2 shows the outcrops of two seams as laid down on a Geological Survey Map. The vertical distance between the two seams is about 600 feet. State, shortly, the conclusions you draw regarding the geological structure of the area from the information given, and sketch a diagrammatic Section on the line AB. (12)

3. Plan No. 3 is the plan of a small surface area on a scale of . Transfer the plan to your answer book and reproduce the plan on a scale of . Leave all construction lines on your answer book. (8)

4. In making the periodical surveys of mine workings with a theodolite, which method of determining the direction of the several survey lines do you use — (a) measurement of the angles between adjacent lines ; or (b) continuous traverse from a starting meridian or base line. State concisely your reasons for the adoption of the method you use. Which method do you consider the more advantageous, having regard to the whole of the work in the mine and in the office? Give reasons. (8)

5. A straight drift, 3 yards wide, is driven diagonally through a block of coal 100 yards square, in a seam 57 inches thick. At the starting point the left-hand side of the drift is exactly in the angle of the block and at the other end the other side of the drift is in the same position. Calculate the quantity of coal got front the drift. Specific gravity of the coal is 1.270. Calculation from a plan will not be accepted. (8)

SECOND PAPER — AFTERNOON SESSION.

1. The following survey was made with a theodolite graduated clock-wise :—

Assume AB to be bearing due south. It is proposed to drive a drift out of DE, or DE continued, rising 1 in 3, in the same direction as BA and commencing from a point vertically under BA. Calculate (a) the distance of the starting point of the drift from D ; and (b) the length of the drift to reach the level of A. (12)

2. The co-ordinates of two stations of the Ordnance Survey A and B are: (A) North, 318,212.88 links ; West, 319,533.03 links. (B) North, 314,045.53 links; West, 312,959.31 links. The angles from the base line of the survey of a mineral holding to A and B are as shown on sketch below. The magnetic bearing of XY is 122° 4'. What is the discrepancy in the length of AB between the survey of the holding and the Ordnance Survey, and what is the magnetic variation shown by comparison with the Ordnance Survey base? (12)

3. If you required to commence a survey from the centre of a shaft, 16 feet in diameter, at an intermediate landing and accuracy were of the utmost importance, how would you proceed in finding the centre? Assume that the shaft is in a straight drift equal in width to the diameter of the shaft. (12)

4. Calculate the distance from the starting point of a curve of 10 chains radius off a straight line of railway to the crossing on a 4 feet 8½ inches gauge. What is the angle of crossing? (8)

5. Having measured a piece of land with 66 feet chain and calculated the area direct from your field notes and found the area to be 6.575 acres, you discover that your chain and tape each measure 66 feet 3¼ inches on a standard base, and have stretched uniformly. What is the correct area? (8)

6. Write out an imaginary survey of a level and four rooms to the rise in a pillar and stall, or stoop and room working. Assume a dip of 20 degrees, and that the level has just crossed a fault with a displacement equal to twice the thickness of the seam. Give reasons for the adoption of the method of booking you use in preference to other methods, The notes must be such as would enable another surveyor to produce a correct plan. (8)

7. The co-ordinates of two points B and C with respect to a point A are

Calculate the radius of a circular curve passing through the three points. Check your answer by construction. (8)


* Questions set at Examinations in November, 1927. The figures in brackets against each question indicate the maximum number of marks obtainable. The plans and sketches have not been reproduced. Complete sets of questions available through H.M. Stationery Office, 1s 6d. net. The First Class questions were reproduced in last issue.


Related Articles

Pub.
Date
Article (Newspaper)
28 Jan 1927  Examination Questions, Second Class.* (The Science and Art of Mining)
10 Sep 1927  News and Notes (The Science and Art of Mining)
14 Jan 1928  Examination Questions, First Class or Colliery Managers.* (The Science and Art of Mining)
28 Jan 1928  Examination Questions, Surveyors.* (The Science and Art of Mining)
11 Feb 1928  Examination Results (The Science and Art of Mining)
10 Mar 1928  Notes On Surveyors' Examination* (The Science and Art of Mining)
02 Jun 1928  November (1927) Examinations*, Notes on Candidates' Answers (The Science and Art of Mining)

 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 28 Nov 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print