Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Articles by date
Articles by colliery
Personal name index
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious


 Newspaper Articles Index Newspaper Articles 

14th January 1928, Page: 197, Column: 1

Examination Questions

First Class or Colliery Managers.*

WINNING AND WORKING.

1. Shafts are sunk to a depth of 600 yards through strata dipping 1 in 5 to work a coal seam of the following section Roof moderately hard. Coal, 3 feet. Dirt, 1 foot 6 inches. Coal, 1 foot 6 inches. Floor soft. Draw a lay-out plan of workings from which 400 tons per shift might be expected. Show particularly the roadways along which it is intended to haul coal, and give the important measurements. (50)

2. In sinking to the coal measures, what are the various geological formations that often prove difficult of penetration on account of water and soft strata? flow have these strata been formed? (40)

3. Where men are conveyed by mechanical haulage to and from their work in a main incline, what devices would you suggest to stop the trolleys in case the rope breaks? (40)

4. What conditions would influence you in deciding to use curved steel girders in preference to other forms of support for underground roads? Give detailed sketches of the form of girders you would recommend and the method of fixing them. (40)

5. Mark out a pillar of coal you would leave to support an important building. The seam is 4 feet thick, dips 1 in 4, and lies at a depth of 300 yards under the building. The strata are of average hardness right to the surface, and there are no faults. Show dimensions. (40)

6. Show in detail how you would fix in a circular shaft that has reached a depth of 300 yards — (a) A 6-inch diameter rising main; (b) Ventilating air pipes 2 feet diameter. (40)

7. Two roadways crossing at right angles are to be repaired and lined, owing-to severe crushing. Give an account of how you would do this work at and near the crossing, and the precautions you would take for the safety of the men. Which form of lining would you prefer? (40)

THEORY AND PRACTICE OF VENTILATION.

1. On the plan of a mine which accompanies this paper show how you would ventilate the working faces by means of five separate air-currents (splits) and four air-crossings. Show the direction of each air-current and the positions of air-crossings, doors, stoppings, regulators and sheets, and avoid placing air-crossings in positions in which they would obstruct the haulage. (50)

2. Make a sketch plan showing the arrangement of a fan and its driving plant and the fan drift at the surface to comply with the requirements of the Coal Mines Act, 1911. State the kind of fan to which your sketch refers. Would the same arrangements suit all kinds of fan ? The upcast and downcast shafts are 30 yards apart. (30)

3. Assuming the coefficient of resistance to be 0.0015 inch of water-gauge per square foot of rubbing surface per 1,000 feet of velocity per minute, what height of water-gauge would be required in drawing 12,000 cubic feet per minute through an airway 8 feet square 1,000 yards long? (30)

4. Explain the advantage of providing a fan with an evasee, or expanding chimney for the outlet of air. If the area of the chimney at its end nearest the fan-tips is one-fourth of its final area, what saving in horse-power would be effected by the use of this contrivance in a fan producing 240,000 cubic feet per minute ? (30)

5. If 150,000 cubic feet of air per minute pass when the horse-power is 150, what effect on the quantity would be produced if the horse-power were increased to 200 ? (30)

6. Sketch and explain the details of a mechanism, suitable for automatically opening and shutting separation doors, on a roadway along which coal is being conveyed by means of an endless-rope working above the level of the tubs. (30)

7. Show, by means of a simple sketch in vertical sectional elevation, the construction of the original Mueseler safety-lamp, and describe the outstanding feature which specially distinguishes it from all other safety-lamps. (30)

EXPLOSIONS, &C.

1. After an explosion had passed through a dry and dusty roadway in a mine, how would you ascertain whether it had been an explosion of firedamp or coal dust? (30)

2. Discuss from the point of view of safety the use of electrically driven coal-cutters, and conveyors, in a dry and dusty seam which gives oft firedamp freely, and note in detail the dangers that may arise. (25)

3. A longwall face is approaching, from the dip, old workings containing water which it is desired not to disturb. What points would you consider in deciding the size of the barrier to be left against the old workings? (25)

4. In connection with explosions, what importance is to be attached to the degree of fineness of coal dust and stone dust respectively? Why is freshly powdered coal dust less dangerous than dust that has been exposed to a dry atmosphere for a long period? Where is the most dangerous dust usually found? (25)

5. What special precautions would you take in working a seam of coal liable to blowers, or sudden outbursts of firedamp ? (25)

6. It is found necessary to seal off a pair of shafts after an explosion. Describe and sketch how this may be done quickly and effectively at the surface with materials usually available at a colliery. (25)

MACHINERY.

Electrical Section. — 1. Describe an alternator suitable for coupling direct to an engine running at 375 r.p.m. and for generating 3-phase, 50-cycle, 440-volt current at the rate of about 300 kilowatts. (Calculations are not wanted.) How many field poles will there be on the magnet wheel ? (28)

2. Give a list of the instruments and apparatus that should be fitted to the switchboard controlling and protecting two alternators of 3-phase type (say of 750 kilowatts each and 2,200 volts between phases) and state their purpose and function. (28)

3. The copper conductors of an overhead 3-phase transmission line 1,500 yd. long are 0178 in. in diameter. (Resistance 0.965 ohm per 1,000 yd.) Power is put into the line at 3,300 volts and at the rate of 600 kilowatts. The power factor is 0.8 What is the drop in voltage? If you know of any other factor than those given that would affect the drop in voltage state what it is but ignore it in calculating your answer. (28)

Mechanical Section. — 4. Describe a coal-cutting machine of the chain type as applied to longwall work. (28)

5. Name two types of conveyor in use along coal faces underground and describe one type stating the kind of power used for driving it. (28)

6. The drawings on the separate sheet show an eccentric strap. Make in your answer book to a scale of one-quarter full size a drawing showing a side elevation of a one-piece eccentric to suit the strap and bored for a shaft 6 in. in diameter. The travel of the eccentric rod and valve is 3 in. Show also by a part cross-section the profile or shape of the rim. Mark the leading dimensions. If compasses are not available hand sketches will be accepted. (38)

7. The rate of evaporation of water in a Lancashire boiler is found to be about half what was expected. To what causes might this poor evaporation be due and how would you go to work to find the cause or causes? (28)

8. Describe suitable plant at the top of a shaft for the quick handling of tubs with cages in use having 3 decks. (28)

SURVEYING, LEVELLING, AND DRAWING.

1. Calculate the co-ordinates of the following short traverse, also the tangent of the angle the line joining A and B makes with the meridian line, and the length of AB on plan, and on the slope.

Check your result by plotting to a scale of an inch to 100 ft. (30)

2. Calculate the length on plan, and on the slope, of a drift cross-cutting the strata between two seams 30 yards apart, and dipping 1 in 7 :— (a) if the drift rises 1 in 40 towards the rise of the strata; and (b) if the drift dips 1 in 3 in the same direction as the strata — the drift starting in each case from the upper seam. (25)

3. Write out the notes of an imaginary survey to show your method of booking. Show a level and three places to the rise thereof. Assume (a) a seam 6 ft. thick; (b) a pillar and stall or stoop and room working; (c) a dip of 1 in 3; and (d) that the level has just crossed a fault with a displacement of 6 ft. State very shortly your reasons for the method of booking adopted. (25)

4. You require to start a survey underground from the centre of a circular shaft 20 ft. in diameter. How would you find the centre of the shaft if it were impossible to go into the shaft? (30)

5. You wish to calculate, from a plan on a scale of 25.344 inches to a mile, the area of an irregular enclosure. You have available only a scale of one inch equal to 132 feet. How would you find the area? (25)

6. The depth of cutting required in the formation of a railway siding at three adjacent pegs A, B and C, at intervals of 50 feet, is 9 ft., 11 ft., and 14 ft. respectively. The width of cutting at formation level is 14 feet, and the inclination of the slopes 1 in 1½. Draw to a scale of an inch to 10 feet a cross-section at each peg, and calculate the excavation necessary in the formation of the siding between A and C. Assume that the surface of the ground is level at right angles to the line of railway. (30)

GENERAL MANAGEMENT AND MINING LEGISLATION.

1. Enumerate very shortly some of the conclusions and recommendations of the recent report of the Royal Commission on Mining Subsidence. (30)

2. Give a concise summary of the various provisions of the Coal Mines Act, 1911, and General Regulations relating to travelling roads underground and to the safety of persons passing thereon. (25)

3. What steps have to be taken on the abandonment of a mine to comply with the Coal Mines Act, 1911 ? (25)

4. What are the requirements of Section 42 of the Coal Mines Act, 1911, relating to the provision of two main intake airways? What are the General Regulations made under the Act for the exemption of certain classes of mines from these requirements? (25)

5. Give a short concise summary of the provisions of Sections 49 and 50 of the Coal Mines Act, 1911, and of the General Regulations relating to the support of roof and sides. (25)

6. What are the duties of an "Electrician" as set out in General Regulation 131 ? (25)


* Questions set at Examinations in November, 1927. The figures in brackets against each question indicate the maximum number of marks obtainable. The plans and sketches have not been reproduced. Complete sets of questions available through H.M. Stationery Office, 1s 6d. net.


Related Articles

Pub.
Date
Article (Newspaper)
28 Jan 1927  Examination Questions, Second Class.* (The Science and Art of Mining)
10 Sep 1927  News and Notes (The Science and Art of Mining)
14 Jan 1928  Examination Questions, First Class or Colliery Managers.* (The Science and Art of Mining)
28 Jan 1928  Examination Questions, Surveyors.* (The Science and Art of Mining)
11 Feb 1928  Examination Results (The Science and Art of Mining)
10 Mar 1928  Notes On Surveyors' Examination* (The Science and Art of Mining)
02 Jun 1928  November (1927) Examinations*, Notes on Candidates' Answers (The Science and Art of Mining)

 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 28 Nov 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print