3rd December 1927, Page: 151, Column: 1
Mining In Nova Scotia
Before the Manchester Geological and Mining Society at the November meeting in
a paper on Coal Mining in Nova Scotia, Mr. Alfred J. Tonge said it would
be a mistake to assume that the mining industry in Nova Scotia was behind that
of this country in the development of machinery. The methods followed were
influenced by British example and also by the proximity to the United States.
On the whole, British methods had been the guiding force in the engineering
departments and the influence of the United States was seen in the commercial
and transportation departments. This was natural. In the marketing and
transportation of coal Canada came into contact with her great neighbour,
occasionally financial assistance was sought, and policy was affected. If it
was possible to define somewhat subtle boundaries it might be said the
influence of the States was to be seen in these matters. (1) The general appeal
that large outputs made. (2) A desire for these outputs, sometimes without
consideration of the quality of the coal. (3) The handling of the coal after it
left the screens and in transportation. (4) The oblong timber-lined shafts.
This might also be due to the cheapness and plenitude of timber in the early
days. (5) In the commercial and accounting departments. This was probably due
to the adoption of the dollar as the monetary standard. British methods were to
be observed in (1) Ventilation schemes. (2) Pumping and drainage schemes. (3)
Haulage and general methods of work, except that large tubs or boxes were
employed, as in the States. (4) Lighting and explosives. (5) The rules for
safeguarding life under the aegis of the Provincial Government.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Tonge, Alfred J. | | | |