3rd December 1927, Page: 150, Column: 1
Machine Mining*
By Thomas Bryson, A.B.T.C., M.I.Min.E.
Coal-mining: An Extractive Industry. — Coal-mining is an
extractive industry in which man so operates on the forces of nature that he is
enabled to remove coal and associated rocks from their natural beds in the
earth's crust to the surface, where they may become useful to those who need
them and can purchase them at a price that makes their use profitable. It is
our business to win coal in the best possible condition at the least cost. The
factors which have an influence on the profitable production of coal are three
in number, namely, labour, capital, and enterprise. An essential quality of
labour is that it should be active in production, organisation, and transport;
the industry can not carry the burden of passive labourers. Simple labour, in
the case of the miner, involves the application of muscular energy in the
direct performance of work in digging coal, filling tubs, or drawing tubs from
one place to another ; but under modern conditions requiring greater
productivity the burden of the simple labourer is lightened by the use of
natural, chemical, electrical and mechanical forces, and therefore muscular
energy forms but a fraction of the total energy expended in bringing coal to
the service of those who need it.
Need for Better Tools and Appliances. — The productivity of labour
is influenced by the physical fitness, skill, and intelligence of those engaged
in production, organisation and transport. Although the occupation of one
person in the industry may be such as to call especially for vigorous muscular
exercise, it is perfectly clear that he will do more useful work if he is
skilled than if he is unskilled ; but even if he should not be employed in hard
manual work he must bring the qualities of skill and intelligence to bear on
his work in order that he may render the greatest service of which he is
capable. In attempting to solve the problem of how best to increase the
productivity of labour it appears desirable that not only should consideration
be given to the health of those engaged in the industry, but that they should
be made familiar with the problems of the industry and the possible methods of
solving these problems.
The productivity of labour can be increased by improving the tools and
appliances used in the production and transport of coal. Machinery may be used
in multiplying the available labour power, in performing operations that could
not be done without its assistance, and in relieving excessive muscular strain.
Capital and Enterprise. — The provision and efficient use of
machinery requires capital, enterprise and organisation. Coal of good quality
may exist within easy reach of the surface, but it will remain unworked in the
absence of capital and enterprise. Given these, the success of the undertaking
depends entirely on the efficiency of the organisation and the supervision of
the various operations incidental to coal-mining. One of the most important
functions of the persons responsible for the organisation of the business of a
coal mine is the supply and maintenance of mechanical aids to production, but
that duty is not less important than the development of a system by which those
mechanical aids might be used efficiently. The organisation of such a system is
only possible when there is an adequate number of intelligent and experienced
men in the mine who may be called upon to exercise supervision over the
operations they are specially capable of performing. The extensive application
of machinery to mining operations can not be successful without complete
co-ordination of efforts.
Early Efforts in Machine Mining. — It is an inherent
characteristic of man that he should strive after something beyond his
immediate reach, and it was probably because of this, rather than the need of
designing a machine which would undercut coal more efficiently than men could
do it, that the designer of the original "iron man" set himself the
task of constructing a machine that would operate in the manner of a collier's
pick. The "Birth" coal-cutter which was first used at West Ardsley
Colliery, Yorkshire, in 1862, was a machine of this kind driven by compressed
air. One of the earliest disc machines, if not the first one, was that designed
by J. Scarisbrick Walker, one of the founders of Walker Bros., Pagefield
Ironworks, Wigan, in 1869. The air-engine with its eccentrically-operated
slide valve produced rotation of the crank shaft, and the motion of the shaft
was communicated to the disc, hung from a spindle in the side of the frame, by
means of a toothed bevel. It was in the year 1874 that the first chain machine
was introduced by the firm of Wm. Baird and Co., at their own Gartsherrie
Collieries. The original bar machine appears to have been first used in the
early fifties of the last century. Crude as these machines were, they were
capable of doing good work in relieving colliers of the hardest part of the
operation of coal-getting and they formed the beginning of a great development
in the application of machinery to the getting and transportation of coal.
Development of Mechanical Coal-getting. — At the beginning of the
present century rapid strides had been made in some of the British coalfields
in the use of coal-cutting machines of various types, and many workmen had
become highly skilled in their use, and had taken a very active part in the
improvement of the construction of machines and the methods of applying them to
their work.
In the year 1902 about 450 machines were in use, and it is known that 159 of
them were driven by electricity and 298 by compressed air. During the year 1912
there were 2,444 coal-cutters in use, 1,134 being driven by electricity and
1,310 by compressed air, and the Reports of H.M. Inspectors of Mines for the
year 1926 show that 3,114 electrical coal-cutters and 3,398 compressed-air
cutters were in use.
In the year 1912 there were 168 mechanical conveyors in use and last year the
number was 1,599. It is therefore seen that, notwithstanding temporary
reductions in the number of machines and conveyors in the various coalfields,
there is an ever-increasing total number of them being used.
Applications of Coal-cutting Machines. — One sometimes hears it
said that if a seam can be got by hand at a profit there is no need to apply
machinery to get it, but apart from the obvious lack of serious argument
regarding the amount of profit obtained, it has been demonstrated that the
introduction of coal-cutters has led to reduction in the cost of production, as
compared with hand-getting, and has been indirectly responsible for the
improvement of roof conditions, with consequent diminution in the cost of roof
supports. Furthermore, the use of machines enables greater outputs per unit of
time to be obtained for a certain length of exposed face, the face of work is
more rapidly advanced than it possibly could be by hand-getting, and therefore
the difficulty of regulating the effects of roof weights is lessened. The use
of machinery promotes the continuity of a system of work which might be
exceedingly difficult to maintain in a state of efficiency when coal is got by
hand, for in the latter case absence of workmen may lead to the places in which
they work falling behind the general line of face. It is then that the
regulation of roof weights becomes most difficult. Formerly the amount of coal
delivered to and loaded at each loading point in the pit amounted to a few
tons, but now we find that the whole output of a colliery may be loaded into
tubs at a few loading points. Think of the case in which each 250 tons of daily
output is loaded at one point into the tubs, and you will realise the
advantages that are likely to accrue from an organisation of such a kind.
The present trend of development in the methods of mining coal and of driving
such galleries as are necessary for the connection of one seam with another is
towards the mechanisation of the processes incidental thereto. Headings may now
be driven by means of electrical or compressed air machines of a light and
portable character, shot-holes may be bored by such machines, and the heavier
types of portable machines may be used in driving wide stalls, short walls, and
in cutting in long walls. The methods of conveying coal are being developed
rapidly, and in this country a beginning has been made in the use of
storage-battery locomotives.
* From paper presented at the November meeting of the Barnsley Mining Students
Society.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Bryson, Thomas | | | |
| Walker, J. Scarisbrick | | | |