8th October 1927, Page: 92, Column: 1
Coal Dust And Gases From Explosives
A series of papers by J. B. Crawshaw and G. W. Jones, of the
United States Bureau of Mines, has recently appeared in Coal Age, in which an
account is given of investigations of the behaviour of gases resulting from the
detonation of explosives under various conditions. In one of these the authors
study the effect of coal dust upon the gases resulting from the detonation of
"permissible" explosives. The following is extracted
therefrom:—
The investigation of that part of the problem treating of the effect of coal
dust under normal conditions resolves itself into the question : "Does the
coal and coal dust act as an unmixed ingredient of the explosive ? And, since
coal is composed chiefly of carbon and hydrogen, does it augment any oxygen
deficiency of the explosive and thereby increase the quantity of poisonous and
combustible gases liberated by the explosive on detonation ?"
When an explosive performs its normal work, the gases which are liberated on
detonation expand and cool to such an extent before coming in contact with the
air, that reactions with the atmosphere outside the drillhole can be neglected.
Accordingly, as most nearly simulating actual conditions, the following test
procedure was adopted :—
(A) The explosive was packed tight in the borehole of the cannon, or until it
attained a "density of 1." One hundred grammes of coal
"drillings" were then added and tamped against the explosive. A disc
of asbestos paper, to hold the coal drillings in contact with the explosive
charge was next introduced. Lastly, 1 lb. of dry fireclay stemming was added
and tightly packed. The explosive was set off by an electric detonator and the
gases discharged into an atmosphere Of nitrogen.
(B) To simulate the effect of a blown-out shot with coal dust in front of the
charge, the only modification in the test from procedure A was to discharge the
gases into an atmosphere of air.
The series of tests with procedure A showed only a slight reaction between the
coal dust and the gases resulting from the detonation. Since these conditions
should be more favourable for reaction than when the coal dust is behind the
explosive, it was decided to run a series of tests with air in the discharge
chamber so that there would be greater opportunity for reaction. The
modification in the procedure from that of test B was to first introduce the
coal drillings into the borehole and then the explosive and stemming.
To determine the extent to which the coal dust had entered into reaction in
each of these series of tests, the gases obtained, under each condition were
compared with those secured under the same condition when no coal was present.
The total quantity of carbon bearing gases (CO2, CO and
CH4) produced was used as the criterion of reaction, since these
carbon containing gases must result either from the carbonaceous material in
the ingredients of the explosive or from the coal. Any increase in the total
carbon of the gases above that originally in the explosive is attributable to
the coal.
The coal dust used in all of the tests was drill cuttings taken from the
Pittsburgh bed. The proximate analysis of this coal was : Moisture, 2.7 per
cent. ; volatile matter, 32.9 ; fixed carbon, 58.7 ; and ash, 5.7 per cent. The
ultimate analysis was : Hydrogen, 5.2 per cent. ; carbon, 78 ; oxygen, 8.9 ;
nitrogen, 1.4 ; and sulphur, 0.8 per cent.
A preliminary investigation of the effect of the size of coal dust showed that
the resultant gases and the quantity of coal taking part in the reaction were
practically the same for all sizes of dust, from that passing a 10 and retained
on a 20-mesh screen to all passing a 200-mesh screen. This was probably due to
the action of the force of the explosion on the larger particles by which they
were pulverised to the fine sizes which took part in the reaction. However, in
order that all test conditions would be uniform, the drill cuttings were
crushed so that all the material could be passed through a 10-mesh screen.
In the investigation of each of the above conditions, 12 ammonium nitrate
permissible explosives, having a fairly wide range of oxygen deficiency, were
used.
From the data obtained in the tests, the following conclusions can be drawn
:—
(1) When the hot combustible gases (CO, H2, and CH4),
liberated by the detonation of an explosive, are discharged into air, they
react with the oxygen therein.
(2) When the coal dust is suspended in the air into which these hot gases are
discharged, the reaction is much more pronounced. In nearly all of the present
tests, the oxygen had been reduced to such a point that further reaction Was
impossible. On the average 75 per cent. of the available oxygen was consumed.
(3) When coal dust is thrown into the air behind the hot gases from an
explosive, no extensive reaction occurs.
(4) The reaction in which the coal dust takes part is one between such dust and
air. It is initiated by the reaction between the gases and air.
(5) Coal dust reacts only to a slight extent with the ingredients of an
explosive or with the gases resulting from its detonation.
To check the last conclusion under conditions more favourable for reaction
between the coal dust and the ingredients of the explosive, a number of
permissibles were tested in direct contact with coal dust, that is, with the
wrapper removed. Under these conditions, the explosives were nearly balanced
— i.e., the ingredients contained practically the exact amount of oxygen
required to oxidise all of the carbon and hydrogen contained in the explosive
to carbon dioxide and water. The gases evolved on detonation of an explosive,
in contact with coal dust and with its wrapper removed, were found to contain
appreciably less carbon monoxide and methane, but more carbon dioxide, than
when the explosive with its wrapper was detonated with no coal dust present. In
both cases the gases were discharged into an atmosphere of nitrogen to prevent
after-burning. These tests confirm the conclusion that coal dust in a drill
hole in the absence of air does not act to any appreciable extent, as an
unmixed ingredient of the explosive. Neither does it react readily with the
gaseous products of detonation.
When the above conclusions are applied to the conditions met with in actual
mining, the effect of coal dust can be summarised as follows :—
(1) When a shot does the normal amount of work, coal dust in the drill hole
will react only to a negligible extent and will not appreciably increase the
volume of noxious gases evolved by the explosive.
(2) When a blown-out shot occurs, the coal dust in front of the explosive may
be ignited by the flame from the hot combustible gases liberated on detonation.
This may readily occur on contact with the air. As a result, a large quantity
of poisonous gases may be produced or a coal dust explosion may be initiated
that may propagate over a large part of the mine.
Both these dangers can be guarded against by thoroughly cleaning the drill-hole
before loading, and by the use of sufficient non-combustible stemming.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Crawshaw, J. B. | | U.S. Bureau of Mines | |
| Jones, G. W. | | U.S. Bureau of Mines | |