|
10th September 1927, Page: 60, Column: 1 Some American NotesFalls in U.S. Mines. The killing of more than 1,200 coal and metal miners every year by falls of the mine roof constitutes one of the biggest problems in the mining industry of the United States. It is recognised by the Bureau of Mines that the solution of this problem is very largely a matter of enlisting the hearty and active co-operation of both the mine operator and the mine employee. It required about four years of intensive educational measures on the part of the Bureau of Mines to convince the public that coal dust in the absence of combustible gas is explosive. It required about ten years longer to obtain general recognition of the fact that rock dust properly applied in connection with coal dust would prevent the propagation of coal dust explosions. In consideration of the critical problem of deaths from falls of roof, the question naturally arises as to how long a period will be required to effect a substantial reduction in accidents and fatalities from this cause. It is found that the majority of accidents from falls occur where the roof is not artificially supported by timber or other means ; that the placing of timber is governed in a few cases by regulations which call for placing roof support systematically ; but in most cases the timber is placed where in the judgment of the miner or foreman there appears to be danger ; that the soundness of the roof is determined by miners and officials by tapping the roof with picks, drills, and wooden or iron bars, their judgment being governed by vibrations or sound ; that the greatest frequency and severity of accidents from falls occur in mines where there is lack of systematic timbering and lack of supervision. The subjects that admit of laboratory research or testing in a study of falls of roof are relatively few ; but, there is a field for research and tests which would embrace the following :— Devices for testing the soundness of roof. The effect of moisture and change of temperature on roof material, such as shale, clayey shale and slate-like shale. The relative effectiveness of material suitable for application to mine roof to prevent it from weathering. The testing of material and structures used for support of the roof. A study of current practices at mines is believed to afford an opportunity of obtaining valuable information as to the cause of accidents from falls, which will lead to remedies for their prevention. This investigation embraces many features of engineering and developed practices, among which may be listed :— The mining method ; the local geology ; character and nature of roof material; details of circumstances under which accidents occur ; method of timbering employed ; timber regulations ; supervision of timber regulations ; and methods of testing the roof and roof inspections. A large proportion of falls-of-roof accidents are undoubtedly due to the failure of the individual miner to exercise the full precautions necessary for his protection. It is recognised, therefore, that any successful campaign for the reduction of this class of accidents must be largely directed toward the awakening of the miner to the urgent necessity of preparing himself to guard unceasingly against this peril. The great majority of accidents from falls are caused by a relatively small piece of material which some system of timbering is capable of supporting. These pieces of roof frequently fall from places that are between the props or other timber supports, and at the immediate working face. Roof Support. Mr. J. W. Paul, the senior mining engineer of the U.S. Bureau of Mines, discussing in a Bureau Circular the conditions and factors for consideration regarding the area of unsupported roof in coal mines, says that under certain physical conditions of roof material, and under certain methods of mining, it will be found that, for the support of the roof, there will be a well defined ratio between the area supported and the area that will remain in place without timber support. Where props are found to support the roof when placed 4 feet apart in rows 4 feet apart, each prop will support 16 square feet. Where it is necessary to reduce the spacing to 3 feet in either direction, the area supported by a single prop will be 9 square feet. An area which can be supported by props Set 3 feet apart may be supported by props 4 feet apart if caps are used on the props. In order to safeguard the man at the working face it would be of great value to determine as a minimum limit the area that should be left without temporary or permanent support by the use of timber. Any area in excess of this should be timbered in accordance with a definite schedule or system. No timbering system is complete that does not call for temporary or safety props where there is the slightest indication of unsound or unsafe roof as determined either by appearance, by the presence of slips, or by testing the material with a bar. The Circular adds that if accidents from falls at the face are to be materially reduced greater attention must be given to the support of the roof at the working face. Where bad roof conditions prevail systematic timbering is essential to keeping the mine in operation, and where timbering is very essential for the recovery of the coal an element of safety to the workmen is present which is often absent in mines with better roof and where the timber is set without any regularity or in accordance with any system. The present trend in many American mines, Mr. Paul points out, is the introduction of narrow work-driving of all entries and rooms narrow, 10 to 12 or 14 feet- and this should bring about a reduction in roof hazards. In concentration of mining, where large numbers of men are assembled in groups, especially where long faces are employed and mechanical loading devices, there is need for close supervision. Where this close supervision is in effect there is less probability of the roof being neglected, although on the other hand there is the added hazard from inability to hear incipient roof movement because of the noise from the machinery. Local conditions will always necessitate special consideration with respect to any system of timbering, but in most American mines there is great similarity of these local conditions from place to place in the mine, and once a system is adopted for one unusual condition or irregularity of the roof, the same system of roof support may be used to advantage wherever unusual conditions are encountered. The adoption of plans for roof support in some mines make it necessary to have alternative schemes,— one for normal roof conditions, another for abnormal roof and a third for extra hazardous roof which calls for special treatment in determining the system best suitable.
|
|||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||