|
18th June 1927, Page: 376, Column: 1 Safety In MinesResearch Station at BuxtonA description of the Safety in Mines Research Station at Buxton has been published (Safety in Mines Research Board Paper No. 34, H.M. Stationery Office, price 6d. net). It is intended partly as a guide for visitors to the Experimental Station and partly as an account of the plant and apparatus for reference when research work is described in later papers. Details are given of the plant and instruments for the study of coal dust and firedamp explosions, gob-fires and mining explosives. The date of the official opening of the station was Tuesday, I4th June. Some references to the station are culled as follows :— Problems relating to safety in coal mining have for long exercised the minds of those engaged in the industry, as a study of the transactions of the various mining societies will testify. Amongst such problems that of the behaviour of coal dust in mine explosions has proved the most difficult of solution, for the reason, no doubt, that the phenomena of coal dust explosions can satisfactorily be studied experimentally only when they are of a magnitude comparable with that of an actual mine explosion. The elevation of the Buxton site is relatively high (about 1,200 feet). Although, as at Eskmeals, work may have to be discontinued during periods of severe weather in winter, this will not militate against the progress of the researches because a cessation of large-scale experimental work is necessary from time to time to allow the records to be studied and the results to be interpreted. In the layout of the Experimental Station, provision has been made for all work that requires large-scale operations, such as that on mine ventilation, firedamp explosions, mining explosives and gob-fires. There are eleven principal buildings on the site. Four comprise what may be termed the administrative group, consisting of offices, stores, workshops, enquiry office and motor garage, four are observation stations, two contain ventilating fans and pulverisers, and there is a chamber of special construction intended for the study of gob-fires. All are built of concrete with flat roofs. Two galleries have been constructed for research on coal dust explosions. One of these, 4 feet in diameter, is new and will be used for the systematic research work. The other, 7½ feet in diameter, will be used mainly for demonstration explosions. The 4 feet gallery runs nearly due north and south along a dismantled portion of the old Cromford and High Peak mineral railway track. The gallery is made up of forty sections of mild steel tubing, each 25 feet long, with walls 5/8-inch thick. Each section is built up from three rolled sheets, bent to an arc of 120° and electrically butt-welded together inside and outside. Thick flanges are welded to the ends of each section, a steel packing ring and two metallic asbestos gaskets being inserted between adjacent flanges, so that the tube formed by bolting together the forty sections is air-tight. Each section of the tube has been tested by hydraulic pressure up to 500lb. per square inch. The sections of the gallery are designed to be readily interchangeable. The inclusion of the steel packing rings serves the dual purpose of simplifying removal of the sections and of permitting of the insertion of steel plate restrictions at any of the junctions. Two special sections have been designed for investigating the effect of openings in the gallery on the development of a coal dust explosion. In each of these sections eight equal openings have been cut, four on either side, the total area of the openings being equal to the cross-sectional area of the gallery. The openings, which are elliptical in shape, can be closed by interior covering plates which are manipulated from the outside where they are secured in position by a bridging arm. These special sections can be inserted at any desired position along the tube. The overall length of the gallery, inclusive of the length of the four-way piece and the packing between successive sections, is 1,008 feet. Midway along its length the gallery runs for some distance through a shallow cutting. Here a foot-bridge has been thrown across to provide access from the firing station on the eastern side of the tube to the instrument cabins which are situated on the western side at intervals of 100 feet. The 7½-feet gallery runs parallel to the 4-feet gallery, but on a lower level. It has been built up of sections taken from the gallery used at Eskmeals, only the strongest being chosen. Each section is from 28 to 30 feet long, and the total length of the gallery is 410 feet. This gallery is mounted on concrete blocks similar to those used for the 4-feet gallery, two being provided for each section and one for a four-way piece which is bolted at one end and connects with a fan drift. Separate firing-stations have been erected for the two galleries. These are similar buildings of concrete, measuring 30 feet by 10 feet. The fans serving the explosion galleries have to perform two functions, that of cleaning the gallery of fumes, dust and soot in as short a time as possible after a coal dust explosion, and that of producing a current of air, in either direction, if required during the course of an explosion. A study of the development of a coal dust explosion demands the determination, at as many points as possible in the path of the explosion, of the speed of propagation of flame, the rate of development of pressure and the maximum pressure attained. In a coal dust explosion the most convenient zero-point of time on the manometer charts is the moment at which the cannon-shot that caused ignition is fired. This is not registered directly on the chart, but is recorded indirectly by a sudden deflection from the pressure zero-line, caused by the arrival at the manometer of the shock-wave sent out by the cannon shot. The intervals of time which elapse between the firing of the shot and the arrival of the shock-wave at the respective manometers can be determined once and for all by experimental methods which need not be considered here. When examining a record, the chart is attached to the drum of the measuring instrument by spring clips which keep it taut during the process of measurement. By suitable manipulation of the traversing head and the micrometer head the cross-wires of the microscope are made to coincide with the time-pressure zero point. The vernier and micrometer readings are then taken. This procedure is repeated for all the salient points of the record, the number of points that require to be so determined depending on the complexity of the record. 7½-feet Explosion Gallery. — In addition to its use for coal dust explosions, the 7½-feet gallery is used, in conjunction with a 1-foot gallery, for researches on firedamp explosions. These researches are complementary to those that are being carried out on a smaller scale in the Board's laboratories at Sheffield. The two more important researches which have been put in hand are : (1) On the projection of flame by a firedamp explosion, following up the laboratory work carried out by M. J. Burgess ; and (2) on the effect of restrictions in the path of flame on its speed of propagation, in continuance of the work of W. R. Chapman and R. V. Wheeler. For the former work the 7½-feet gallery is being used. A 30-feet length of the gallery, closed at one end, is separated from the remaining sections by a sliding shutter. The explosive mixture of firedamp and air is contained within this 30-feet section. When the shutter is raised, unrestricted communication is made between the explosive mixture and the air in the remainder of the gallery. Mechanical devices, electrically controlled, are employed to raise the shutter and to cause the automatic passage of an electric spark at the closed end of the gallery as soon as the shutter is fully open. The flame produced passes beyond the original confines of the mixture and into the remainder of the gallery, the distance to which it is projected being measured. The 1-foot gallery is laid parallel to the 7½ feet gallery. It is composed of 16 sections, each 18 feet 9 inches long, bolted together to form a continuous tube, 300 feet long, supported on concrete blocks in a manner similar to that used for the 4-feet and the 7½-feet galleries. The tube is by-passed throughout its length by a 2-inch diameter pipe, with circulating fan for the preparation of explosive mixtures within it, as described for the 7½-feet gallery. On the end of each section a ½ inch flange is welded and two sections are held together by collars pressing against the flanges. Asbestos packing rings are inserted at each joint, which give airtight joints when the collars are bolted firmly together. For experiments in which the speed of flame is to be measured a chronograph has been devised in the design of which certain features of the Mettegang recorder have been adopted. When the flame passes certain points in the gallery it fuses fine screen wires stretched across at these points and forming parts of electric circuits. The fusion of the wires can be recorded electrically by taking advantage of the fact that, on the interruption of the primary circuit of an induction coil, a spark passes in the secondary circuit. The researches on mining explosives are carried out in a group of buildings, consisting of a research laboratory and gun room in which photographic methods are used to investigate the flame and the pressure-waves sent out by an explosive, and an explosion gallery and observation station, where the ignition power of explosives under different conditions of detonation is tested directly by firing them into inflammable mixtures of firedamp and air. The explosives research laboratory is a concrete building, 20 feet by 10 feet, containing photographic apparatus consisting of a rotating-film (or alternatively a fixed-plate) camera, and a brilliant source of illumination provided by a mirror-arc lamp of the type used for kinema projection. A spark-gap in parallel with a leyden jar, charged by means of a 2-plate motor-driven Wimshurst machine, may also be used as the illuminating source. Explosion Gallery and Observation Station. — The explosion gallery is made up of two sections, each 30 feet long and 6 feet in diameter, mounted on four concrete blocks. One end of the gallery is fully open and the other is fitted with a plate in the centre of which is a circular hole, 12 inches in diameter. This hole is closed during an experiment by the mouth of the cannon in which the explosive is detonated, a rubber washer serving to make a gas-tight joint. The cannon is mounted on a carriage on rails on a concrete platform, and can be moved away from the end of the gallery for loading and cleaning. The section of the gallery at this end forms the gas chamber, and can be partitioned off from the other section by a diaphragm of oiled paper which is passed between the two and secured by a movable flange and locking ring, gas-tightness being secured by means of rubber washers. The gas chamber is fitted with additional release doors at the top, the main release of pressure when the explosive is fired being by the rupture of the oiled paper diaphragm. Two strong glass windows in the front of the gallery allow flame to be seen when ignition of the gas mixture takes place. The charge is fired and the effect watched from the observation station, a concrete building, 60 feet from the gallery, provided with a horizontal window 3 inches wide, running its full length. The observation station also serves as a laboratory for weighing the charges of explosive and for gas analysis. Arrangements have been made for research on a large scale into problems connected with the safe control of gob-fires, following a suggestion made to the Board by Mr. E. O. Simcock of Stoke-on-Trent. In certain circumstances, during the process of sealing off a fire, a gas explosion can occur either by an accumulation of firedamp or by the distillation of inflammable gas from the coal. Such explosions are most often of a comparatively mild character, but they may become violent and occasion loss of life. The conditions necessary for such explosions to be produced are not definitely known and the best means of avoiding their occurrence are therefore uncertain. The main objects of the research in progress, therefore, are to determine the limiting conditions necessary for the production and ignition of an explosive mixture behind a stopping, and to study methods of sealing off a fire that are most likely to avoid these conditions. The building in which these experiments are carried out consists of a central chamber, 30 feet square and 8 feet high, simulating a mine goaf, with an air passage, approximately 6 feet wide by 7 feet high, circumscribing it. The goaf chamber and the air passage are connected by three doorways each 6 feet square. At one corner there is a centrifugal blowing fan capable of delivering 10,000 cubic feet of air per minute against a pressure of 1 inch water-gauge. Two control cabins are built against the outer wall of the air-course, for convenience in withdrawing samples of air from the goaf chamber and for taking temperature readings. General Arrangements. — In order to follow the course of an experiment, sampling pipes have been so arranged that air samples can be withdrawn from a number of different positions in the inner chamber. The pipes, twelve in all, are of ¼-inch internal diameter, and with the exception of a few inches at each end, are embedded in the roof and walls of the building. The outer ends are grouped together in the walls of the control cabins, six in each cabin, where they pass, through separate taps and short rubber connections, into a common main. The inner ends are protected by filter caps to prevent fouling of the pipes and have screw connections to enable extension pieces to be fitted to them. The air-samples are withdrawn by aspirators or, if the pressure in the goaf chamber is above atmospheric, they are collected directly over mercury. Certain of the samples are analysed as soon as they are obtained, so that the progress of the fire can be followed continuously. The remainder are stored for analysis subsequently. The temperatures within the goaf chamber are determined by thermo-couples enclosed in iron sheaths of variable lengths which pass through brass sleeves cemented into the roof. Packing glands have been arranged in the brass sleeves so that, when the thermo-couples are in position and the gland nuts screwed down, there can be no leakage of air through the sheats. In each control cabin a milli-voltmeter reading from 15° to 900° C. is mounted on a panel near the air-sampling main. The connecting wires from the thermo-couples are contained in wooden conduits on the roof and terminate in plug sockets on the milli-voltmeter panel. There are six plugs on each panel, corresponding with the six air-sampling pipes, and a wander-plug connected to the milli-voltmeter allows a reading to be taken of the temperature of the air at any of the points within the goaf chamber from which air-samples are taken.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||