18th June 1927, Page: 369, Column: 2
Weldless Tube
In a paper on "Steel Water Pipes : Their Development and Use," by
C. Boyd Varty, before the South African Institution of Engineers, the
author says the merits and demerits of the weldless tube may be summed up as
follows :— Merits : The elimination of the weld makes for greater
security against bursting. Weldless tubes may be made from either mild or high
carbon steel, while welded ones are necessarily made from mild steel only. High
carbon steel may be an advantage for some purposes, but generally not for
carrying water. Demerits: Weldless tubes, excepting those made by the
cold drawn process, which commercially is not competitive with the welding
process, excepting in boiler tubes up to 3 inches, cannot be made with walls as
thin or so well finished as welded tubes. The walls of hot rolled weldless
tubes are not of such uniform section as are those of welded tubes. These
advantages and disadvantages amount to so little in practice either way that,
provided the material used is satisfactory for the purpose for which the tubes
are required, selection is usually made on a question of price, although slight
preferences are occasionally found both ways. Many weldless tubes are, however,
made from high carbon steel, and for that reason are often ruled out when
permanent mains for carrying water are under consideration.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Varty, C. Boyd | | | |