8th June 1927, Page: 363, Column: 2
Coal's Progress In U.S.
In the course of a recent lecture before the faculty and students of the
Princeton School of Engineering, Mr. Samuel D. Warriner, president of the
Lehigh Coal and Navigation Co., said : "In 1821, the total production of
coal in the United States was only 1,322 tons, all of which was anthracite. In
1840, it was 2,000,000 tons or 0.12 of a ton per unit of population. In 1860,
it was 14,000,000 tons or 0.46 of a ton per unit of population. In 1880, it was
71,000,000 tons or 1.42 tons per unit of population. In 1900, it was
270,000,000 tons or 3.53 tons per unit of population. In 1920, 658,000,000 tons
or 6.24 tons per unit of population. It is apparent, therefore, that not only
has the industry increased at an amazing rate, but also that the use of coal
per capita multiplied sixtyfold. In the anthracite field with which I am most
intimately acquainted, 1,300 tons of production in 1821 have now become an
annual production of approximately 80,000,000 tons. This rate of progress has
only been made possible by the contribution of engineering skill which has
rendered it possible to provide for each inhabitant of this country 61 tons of
coal annually by the labour of about ½ of 1 per cent. of its population.
Pre-eminent as has been the United States in its production of coal, it has
been equally pre-eminent in the use of machine power in coal production.
Statistics show that the American bituminous miner on the average produces 5.19
tons per day, tMe anthracite miner, 2.53 tons per day, while the English miner
produces only 1.12 tons per day. This comparison is not entirely fair in that
the English mines are of more difficult operation than are the average of the
American mines, but it is indicative in a degree of the progress we have made
in this country in mass production as compared with foreign countries.
Approximately 70 per cent. of all our bituminous coal production is now mined
by machine as against approximately 18 per cent. in Great Britain. In
comparison with the pictures which perhaps you may have seen of old English
coal mines where the workers are laboriously carrying the coal mined up the
shafts by ladders in baskets on their backs, you have now to visualise the
present development of the industry from a mechanical standpoint. The average
depth of the United States bituminous mine is 262 feet. The distance of the
coal mined from the foot of the shaft may approximately average a half-mile. In
the present state, therefore, of mechanical art, each worker employed on the
average in the bituminous mines with the aid of machinery now cuts and blows
5.19 tons of coal per day, transports it to the foot of the shaft, hoists it,
screens it, prepares it and places it on board cars. In our own anthracite
field where conditions are much more difficult, each worker mines on the
average 2½ tons per day, transports it at least the same distance, hoists
it 415 feet, puts it through complicated separating and cleaning machinery,
places it on cars, and in addition to this transports 25 per cent. additional
waste material mined with the coal, and deposits it on waste banks. In addition
to this, he pumps from the mines from 10 to 20 tons of water for every ton of
coal, and sends down approximately 7½ board feet of timber for each ton of
coal produced. In the days of hand labour and crude mechanical devices, such
accomplishments would have been manifestly impossible. The comparison is
startling, but is a correct measure of the contributions which have been made
to the industry by engineering and power."
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Warriner, Samuel D. | | President | |