8th June 1927, Page: 353, Column: 2
Conveyors Underground
A paper on "Conveyors as Coal-loading Machines" was given at a joint
meeting of A.I.M.E., A.S.M.E., and National Coal Association, by Mr. A. R. Anderson,
and in a general summary as reproduced in Mining and Metallurgy
he says the most advantageous use of conveyors underground appears to be on
long faces. The stepped arrangement of faces seems to give the best promise for
success, and in experimenting with this arrangement of faces it is best to
start with faces that are not too long. The length of the faces can be
increased as the possibility or advantage of doing so becomes evident. Being
carried away with the thought of high output per face, or the reduction of
narrow work to a minimum, may introduce an element of discouragement that can
easily prove fatal to the whole project. The workings and the operation should
be carefully planned, and it is well to consider what possibilities the
contemplated equipment has for the fastest possible working of the face. It is
fairly well confirmed by experience thus far that it is unwise to use unwieldy,
complicated and expensive loading equipment on long faces.
A face conveyor properly positioned will load out from 60 to 65 per cent. of
the coal without necessity for shovelling. While this percentage is not as high
as obtained by some mechanical loading machines, it compares favourably with a
number of so-called mechanical loading devices, and does not make the
classification of a face conveyor on which the coal may be shot down as a
mechanical loading device unreasonable. In any event, the construction of a
face conveyor should be such that it will not be harmed by shooting coal on it,
because the width of the working space required will be excessive if the
conveyor is placed far enough away to be beyond the fall of coal. Regardless of
what space might ue kept in front of the working face, it is generally
desirable to keep it to a minimum in order that operations may be carried on
with a greater degree of security. Space requirements should be borne in mind
when selecting equipment for long-face work so that a proper factor of safety
may be assured.
Where the development of long faces does not seem possible, and where poor roof
or dirty coal may interfere with the effective use of more complete mechanical
loading machines, the use of portable conveyors mounted on a light truck that
is self-propelling will so aid in loading out both coal and refuse that a man
can load from two to three times the amount of material that he could with a
shovel in the usual way. This makes its use desirable even in clean coal under
good roof conditions, and especially for driving entry headings where there
might not be enough coal available to justify the use of a mechanical loader.
It is not likely that any universal conveyor will be evolved for moving coal
underground. Gradients, capacities required, manner of loading, frequency with
which it has to be moved and degree of flexibility required will always vary
with different applications, and it is to be expected that certain forms and
construction will be more advantageous than others for certain uses. It has
been fairly well demonstrated, however, that the use of conveyors, in one form
or another, is a reliable, simple and efficient means for moving the coal from
the face into the mine cars, and the increasing use of conveyors for this
purpose may be confidently expected.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Anderson, A. R. | | | |