21st May 1927, Page: 348, Column: 2
Steel Works Organisation
At the annual meeting of the Iron and Steel Institute, Mr. F. W. Harbord
in his presidential address recalled the statement by men of wide experience
that to compete successfully under modern conditions a plant producing rails
and structural steel must have an output of at least 10,000 tons of finished
material a week, and some insisted upon an even larger output. That might be
true in countries like America, where the home market was a very large one, but
he was extremely doubtful about it being true in this country. What was really
more important than the size of the plant was that it should be well balanced,
so that it was as self-contained as possible, and that it should specialise in
one particular class of finished material. Mr. Harbord suggested that
the ideal combination would probably be a group of works, each works being
specially designed to produce a particular product, such as rails, sections,
billets, sheet bars, plates, etc., each managed independently as a separate
unit, and of such a size that each could carry overhead charges sufficient to
enable the best men available to be secured, both for commercial and technical
management, but all the works being linked up to a central purchasing and
selling organisation.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Harbord, F. W. | | President | |