18th December 1926, Page: 161, Column: 2
Underground Conveyors
The use of underground conveyors in coal doubles the efficiency of mine labour,
increases production of coal and decreases its cost, according to D. R. Morgan,
of the Coalfield Coal Company of Tennessee in the October
"Mining Congress Journal," in which he also discusses the question of
control of the roof of the mine by timbering to prevent its falling.
"While the economic necessity for conveyors is general, the natural
conditions are in many cases adverse, and in many places it would be impossible
to install conveyors on a commercial basis," says Mr. Morgan."
The introduction of conveyors in old mines is frequently attended with
difficulties and in many cases has been disappointing. One fact to be
considered is the weight of coal that can be loaded into mine cars. Taking mine
cars of the same capacity in both cases there will be a loss in weight as
compared with hand loading. If the haulage machinery is worked to full capacity
under the old conditions, the substitution of a large number of conveyor-filled
cars means a decrease in tonnage. If arrangements could be made for hauling
more cars in a given time, or hauling for a greater time, the loss could be
reduced, but with an increased wage cost. The loss in weight can be partially
met by using cars of greater capacity for conveyor work and avoiding these from
getting mixed up with the smaller cars that are used in the hand-filled places.
The question of roof support is the most vital of all so far as the successful
working of a conveyor is concerned. It is beyond human power to resist roof
pressure even in mines of moderate depth. This pressure has to be sustained
somewhere and in practice it distributes itself. Saving can be effected by
systematic withdrawal of back timbers. Machine cutting is not essential to the
working of a conveyor."
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Morgan, D. R. | | | |