6th November 1926, Page: 117, Column: 2
Compressed Air
Having for his subject "The Uses of Compressed Air" in his
presidential address to the Institution of Mechanical Engineers,
Mr. William Reavell remarked that compressed air is largely used in mining operations.
In coal mines the air is used to operate longwall cutters, pneumatic picks and
heading machines ; occasionally also for pumping and for haulage. The brakes
for larger colliery winders are usually also operated by compressed air.
Compressed air locomotives, though not met with to any extent in British mines,
are sometimes used in America and on the Continent. In other forms of mining
the reciprocating compressed air rock drill, provided with a rotating
mechanism, is almost universally used, the drill being carried on a tripod or
on a column, or, in smaller sizes, being used as a hand drill. Compressing
plants for these drills vary from small portable plants for prospecting work up
to large installations, driven electrically or by hydraulic power or steam.
Perhaps the largest and best-known example of the latter is in South Africa.
Here, in the gold mining area on the Witwatersrand, many thousands of rock
drills are used, principally of the "jack hammer" type. Compressed
air is largely used in quarries and mines for operating tripod and hammer
drills for drilling shot holes, and as the supply of air is available, it is
frequently used also for pumping and operating pneumatic hoists. In modern
tunnelling the compressed air equipment forms a most important part of the
plant employed. In connection with the construction of the various London tube
railways compressed air is used for injecting the grouting behind the cast-iron
segmental lining. The shield used in tunnelling work, and originally due to
Greathead, is driven forward by hydraulic pressure, but the pumps which
supply this pressure are themselves operated by compressed air. Where the
strata through which the tube is driven are waterlogged, compressed air is used
for holding the water back, the section under construction being closed off and
protected by air locks. Compressed air is also used to-day for cutting in heavy
clay by means of the pneumatic spade, which will deal more efficiently and
quickly with the clay to be removed than the older method of the pickaxe and
shovel. With the higher cost of labour in America, the use of compressed air
for open trenching work has been developed more quickly than in this country,
and it is claimed that the average quantity of material moved is about five
times as much with the pneumatic tool.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Greathead, — | | | |
| Reavell, William | | | |