23rd October 1926, Page: 105, Column: 2
Machine Mining
Before the Manchester Geological and Mining Society on 12th October, in a paper
on "Machine Mining with Notes on Roof Control," Mr. Herbert Richford
described experimental work at a Lancashire colliery in a seam
proved at a depth of 600 yards from the surface, the inclination being 30°.
It was decided to try a Longwall machine of the chain type, electrically driven
with a motor 15 H.P., depth of cut 4' 6". Owing to a number of faults, the
gradients alter considerably, and although these faults are a serious drawback
to cutting and filling of the coal, the flatter parts help to reduce the speed
of the coal in passing down the trays and prevent breakage. Costs have been
carefully checked and compared with hand-got coal, and there is a saving of at
least 1s. 6d. per ton. Mr. Richford is of opinion that it is very
questionable if the area of coal referred to could have been worked by any
other method so successfully. There has been no stoppage through falls of roof
at the face, and only minor accidents during the time the machine has been at
work. There is no day work whatever done. Cutting, filling and moving trays
over is all done on contract rates. The men earn good wages, and fill an
average of 4 tons of coal per shift per person employed at the face. Regarding
control of roof weight, the author says the following are rules worthy of all
colliery officials' notice : (1) A straight line of face. (2) Systematic
timbering and packing. (3) Rapid advance of the face. (4) Withdrawal of all
back timber. If these rules are strictly carried out, he is inclined to think
that no matter how bad the roof, it will be made safer and easier to deal with.
In view of the large number of accidents due to falls of roof at the face, he
emphasises the fact that the building of packs and the setting of timber should
be done with the utmost promptitude. A few hours of the manager's time spent
with the deputies discussing the questions of timbering, packing and general
working at the coal face is time well spent.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Richford, Herbert | | | |