|
5th June 1926, Page: 368, Column: 1 Machinery At Coal FaceFrom paper on "The Applications of Machinery at the Coal Face," read at meeting on 8th April of the Institution of Electrical Engineers. Concluded from page 351. By Sam Mavor. Conditions of Service of Coal Cutters. Coal-cutters are portable machines in a special sense, for the feed of the cutter picks is applied, by advance of the whole machine along the face. While in operation the machines are in continuous movement, on rough floors which may be inclined from the horizontal between zero and 60° or more, in closely confined spaces, in more than semi-darkness, in floor water or under roof water, or in an attending cloud of dust, and driven by a rough-handed class of men whose familiar tools are pick and shovel. It will probably be agreed that in the whole range of services to which electric motors are applied none is more exacting than the driving of coal-cutters ; and it will be clear that the design of these machines presents problems of more than ordinary difficulty. Coal-cutters of to-day are highly specialised machines ; they are designed with less regard to the duties to be performed than to the abuse to which they will be subjected. The more the coal-cutter takes its place in the general scheme of mining, the more important becomes its reliability in service, for the greater is the responsibility placed on it. Where the mining conditions are favourable and systematic coal-cutting has been established, the machine takes the primary part in a cycle of operations organised to time table for production of 70 to 150 tons per shift, and in which 20 to 50 men (according to the seam conditions) may be engaged. The penalty of failure of the machine to fulfil its part is disorganisation of the whole scheme, suspension of the correlated operations, loss of wages to the men, loss of output and serious increase of costs to the colliery. Mechanical Conveying. — The application of power to the conveying of coal at and in the vicinity of the coal face may be described as technically and economically essential to intensive mining in which the productive effort is concentrated and large outputs are obtained from comparatively small areas. Coal-cutters increase largely the yield of coal per lineal yard of face per day, and, if full advantage is to be realised from the machines, the coal produced must be promptly removed from the faces. The workings of most existing collieries are laid out for hand mining, and the arrangements of gate roads to the face, and of haulage roads, are designed to deal with a comparatively small output from each working place. The introduction of coal-cutters to formerly hand-worked faces, by largely increasing the output to be loaded and drawn in a given area, puts excessive strain on the organisation for distribution and collection of trams to and from the gate-ends. That the difficulties of dealing with the output from coal-cutters, without radical change in methods of loading the coal and delivering it to the mechanical haulage, are practically insuperable is becoming more widely recognised. The very wide range of conditions under which conveyors are applied, and the frequent necessity for adapting the conveyors to changes of seam conditions and mining circumstances, present abundant opportunities for exercise of ingenuity. The development of conveyor design and the improved capabilities and versatility of these machines are largely due to the initiative and resource of colliery officials in surmounting the difficulties with which the vicissitudes of mining confront them. These developments are reflected in the diversity of forms of shaking gears and their accessories produced by makers experienced in this speciality. Conveyors may bo described as semi-portable machines ; the position of face conveyors is stationary throughout the working shift, but the whole length of the conveyor, and usually its driving gear, are moved towards the face once in each 24 hours ; in thick seams or in hand-got seams the forward move may be every second day. Gate conveyors in respect of their delivering end may remain in position for months, but are gradually extended at the receiving ends as the face conveyors follow the face in its advance. In operation, conveyors are not subjected to the same kind of treatment as coal-cutters, but face conveyors especially are similarly liable to excessively rough usage-usage that would soon wreck any plant not designed with special regard to the nature of the service. It must be accepted that electricity will continue to be excluded from the coal face in many collieries, but the number of these may be reduced by fuller knowledge by mining men of the; characteristics of mining electrical appliances and of the conditions essential to securing and maintaining the highest degree of safety in their use, and by fuller knowledge by electrical men of the conditions of service of coal-face machinery and other in-bye electrical apparatus and of the rough nature of the treatment to which it is unavoidably subjected. Practice of the intensive methods of mining, rendered possible by coal-face machinery, has a bearing on the permissibility of the in-bye use of electricity. The reduced pit room, the less surface of exposed gas-bearing coal, the diminished number, increased area, and improved maintenance of the airways, and reduction of air leakages between intakes and returns, are all favourable to more effective ventilation, and therefore to safety in the use of electricity. On the other hand, the more rapid advance of the workings may in some gaseous seams liberate so much gas as to exclude electrical appliances at the face. This also applies to seams liable to the occurrence of sudden outbursts of gas, and to places in the working of normal seams where accumulation of gas may be difficult to avoid. Where such ventilation can be provided that explosive mixtures of gas and air are prevented, it is clear that electricity may be used with impunity. The measure of the risk that may attend the use of electricity is the degree to which the ventilation falls short, of the standard indicated above: in some seams that standard may be unattainable, in others attainable with difficulty. Generally, intensive mining by promoting effective and economical ventilation should, to the extent it does so, also promote the adoption of electrically-driven coal-face machinery. The flame-proof enclosure of electrical apparatus is not designed for normal conditions of working, for the Regulations require that the men shall be withdrawn if the proportion of gas in the air reaches a figure which is much below the lower limit of danger of ignition. The purpose of flame-proof enclosure is to safeguard against any accidental or unexpected rise in the proportion of gas in the air, such as might be ignited by open sparks. A defect in design or maintenance that might destroy the flame-proof properties of an electric machine or appliance need not, and probably would not, affect normal working under normal conditions, and this renders the more necessary the periodic careful examination and maintenance of flame-proof apparatus. Assuming that apparatus is flame-proof when installed, the safeguard depends on maintenance of that state. Everyone familiar with underground conditions knows the difficulty of securing adequate maintenance of underground electrical apparatus. It takes time to train the personnel, but experience is educating mining men in the necessity for due attention to this subject, and improvement is progressive. At large collieries with competent electrical staffs, adequate in number, very good standards of maintenance exist; only at such collieries is it wise to send underground delicate automatic devices which are only a snare if their condition and adjustments are not properly maintained. The services of the mechanical and electrical engineer to the mining industry have been manifold, but abundant opportunity remains and the measure of it is the high cost of coal production. The output per underground worker is too low, therefore too many men are in the industry — that is why wages are low and costs are high. By mechanical and electrical aids to production the output per man can be increased, wages and the status of the miner can be raised, and the cost and price of coal can be reduced.
|
|||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||