|
13th February 1926, Page: 233, Column: 2 Coal Mining MachineryThe subject of Professor R. W. Dron's lecture in connection with the Glasgow University's scheme of free lectures was "The Application of Machinery to the Coal Face." In referring to the development of coal mining machinery he said that in the working of the mines it was early recognised that any mechanical contrivance to relieve the miner of the laborious work of undercutting a coal seam would be of great advantage. But until methods had been discovered for transferring power from the surface to the coal face it was not possible to introduce any effective coal-cutting machine. When, as the result of advances in mechanical science, compressed air became available about 70 years ago very considerable progress was made and many interesting types of machine were introduced and successfully applied. Electricity was used for lighting underground workings in 1882 and the first electrically driven coal-cutter made its appearance in 1887. From that date onwards the use of the electrical coal-cutter had made steady progress. In Scotland this progress was accelerated by the fact that the thick and easily worked seams were becoming rapidly exhausted and the output could only be maintained by working the thinner seams. During the last 25 years remarkable progress had been made in Scotland, so that now nearly 50 per cent, of the output is won by coal-cutting machinery. It was a notable fact that Scotland was first in the introduction of coal-cutting machinery, and first in the introduction of electric lighting underground. Scotland was a long way ahead of every country except America in the use of coal-cutting machinery and was at least equal to America in that respect. Considering the economic aspect of coal cutting machinery he estimated that the capital outlay involved in each machine was about £1,500. According to published statistics the average output per machine was 7,300 tons per annum. Allowing for interest and depreciation together with power, upkeep, and repairs, a machine had to effect a saving in cost between 1s. 2d. and 1s. 6d. per ton mined before it could be considered a satisfactory investment. The hewer had sometimes a difficulty in appreciating that fact, with the result that there were frequently differences of opinion when the rates per ton were being fixed. Although the great bulk of coal face machinery was at present being run by electricity recent improvements in the technique of air compression had caused a tendency during the last few years towards increased use of compressed air. About 1910 great activity was shown by Scottish colliery managers in devising mechanical methods for reducing the labour involved in loading the coal into tabs after it had been broken down at the coal face. Progress in this direction was, unfortunately, suspended during the war, but during the last few years great improvements had been made by the manufacturers of coal face conveyers, with relative improvements in the organisation of the underground work. One of the most hopeful signs at the present moment was the rapid advance which was being made in this branch of mining. The lecture was illustrated by lantern views showing the various types of coal-cutters, conveyers, and gate-end loaders, including a recent American appliance which combined in one machine the functions of coal-cutter, conveyor, and loader. Cinema films were shown of an Arc Wall coal-cutter at work in pillar and stall workings, and of a machine which cut the coal, broke it down, and deposited it in tubs without any manual labour.
|
|||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||