|
2nd January 1926, Page: 185, Column: 2 Fan-Casings And Fan-InletsThe paper by Professor Henry Briggs, D.Sc., Ph.D., and J. N. Williamson, B.Sc., Ph.D., on "Experiments on Fan-casings and Fan-inlets," presented at the December meeting of the North of England Institute of Mining and Mechanical Engineers, was the third of a series devoted to the detailed study of the mode of action of the centrifugal fan. The experiments were carried out in the Heriot-Watt College, the object of the enquiry being to determine (i.) The degree of variability in velocity of flow in the air-space between the fan-runner and casing; (ii.) The effect of varying the clearance between the fan-runner and the "beak" or commencement of the volute; (iii.) The improvement, if any, to be effected by substituting, for the present more indefinite shape, a casing of a profile following a definite mathematical relationship; (iv.) The effect of altering the width of a volute whose curve has a definite relationship; and (v.) The changes brought about by using fan-inlets of various forms. The Authors submitted the following conclusions :— (1) As might have been expected from previous work on the distribution of air in fans of the drum type, the flow of air in the casing of such a fan is very un-uniform, and much energy is lost therein by excessive turbulence and by the meeting of air-streams of different velocities. So far as they go, the experiments indicate that where the casing expands unduly rapidly, the flow within becomes unduly irregular. (2) In general, sufficient attention does not appear to be paid to the design of casings, small changes in which bring about considerable differences in efficiency. While not proposing the abolition of the method of striking out the volute from a number of circular arcs, we suggest that greater care be exercised in making the carve to follow as nearly as possible a true spiral. (3) Deviation from the exact spiral curve is one of the causes, if not the chief cause, of centripetal re-entry. (4) The Rateau diffusion-ring is the only means known to us of reducing the excessive losses otherwise occurring through high-velocity air from the wheel entering the casing. It also prevents the entire loss of the kinetic energy due to radial velocity. (5) In order to secure a maximum efficiency, the position of the "beak" of the casing requires to be carefully adjusted. Even with any single fan the best position of the beak is not necessarily constant: it is probably affected by the quantity of air being discharged. We propose an arrangement whereby the beak position can he adjusted to suit existing requirements. (6) Our experiments are in no sense conclusive in regard to the best relation between the width of the casing and the width of the wheel, but it is worthy of note that the highest efficiency obtained was with a casing having (except near the beak) a truly spiral profile and a width less than half that of the corresponding Sirocco type. (7) The form of inlet affects the fan efficiency to a notable degree. Probably considerable improvement could be effected in existing plant in this regard. It is not sufficient to have a large inlet; the form should be such that the ingoing air is guided gradually towards the blades in order to minimise shock and turbulence within the runner.
|
|||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||