|
21st November 1925, Page: 135, Column: 2 Thermal Efficiency"The Thermal Efficiency of a Carnot Engine" was the subject of a paper by Dr. J. S. Haldane before the Institution of Mining Engineers on the 4th inst., arising out of discussion of his earlier paper. He opened by saying that with a heat-engine we obtain mechanical work in virtue of forcible expansion caused by heat energy communicated to the working substance. The process, however, is essentially a cyclic one, as Carnot pointed out. His demonstration of this is absolutely fundamental to the understanding of a heat-engine. At the end of the cycle of operations the working substance has been brought back, either within as outside of the engine, to its original state; and the net work done on the engine must, on the dynamical theory of heat, be equivalent to the net heat which has disappeared in the cycle as work. The cycle involves compression (causing re-formation of heat) as well as expansion, whether the compression is produced by work done by the engine and the atmosphere, as in the internal-combustion engine, or by molecular work practically alone, as in the condensing steam-engine, or by a combination of molecular work and work done by the atmosphere, as in the non-condensing steam-engine. Thermal efficiency is evidently the ratio of the mechanical energy obtained to the heat-energy applied in obtaining it, both quantities of energy being expressed as either units of heat (e.g., calories or British thermal units) or units of mechanical energy (e.g., kilogram metres or foot-pounds). In the working of a heat-engine there may be endless throwing away of heat through what may be called accidental causes. But these can be avoided more or less completely; and for the purpose of theoretical discussion we may, following Carnot, leave these accidental losses out of account, and consider only the heat necessarily applied. If, now, under this condition, a great deal of heat is applied and converted into work during the expansion of the working substance, but, at the end of the cycle, nearly as much work has been re-converted into heat, so that the net conversion of heat into work has been very small, we must, it seems to Dr. Haldane, regard the percentage efficiency as correspondingly low. It is efficiency in turning heat into mechanical energy that we mean by thermal efficiency; and the net proportion which is turned into mechanical energy out of the heat applied to the working substance in the cycle of a heat engine expresses its thermal efficiency when accidental losses of heat are left out of account.
|
|||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||