|
7th November 1925, Page: 113, Column: 2 Tram Shackle AccidentsIn the course of discussion on D-links for Colliery Tram Shackles before the South Wales Institute of Engineers, Mr. J. Dyer Lewis said it must not be concluded that all haulage accidents were due to faulty shackles and draw-bars. A large number resulted from men riding on the "guns," against the Regulations, and being run over. He favoured using the best wrought-iron in the manufacture of shackles, inasmuch as it resisted the shocks to which shackles were subjected better than mild steel. Many shackle accidents were due to neglect in regard to the placing of the pin through the lower eye of the D link, thus bringing about a strain which eventually opened the link and disengaged the connection to the draw-bar. He had also found defective welds to cause shackle failures, and where the weld was at the end instead of at the side. Shackles were now made at factories and not at the collieries, and he would suggest that colliery owners should insist upon tests duly certified by an engineer or the Board of Trade.
|
|||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||