|
15th August 1925, Page: 21, Column: 2 Examination QuestionsSecond Class or Under-managers.*MINE WORKING. 1. Show by sketches in plan and section a typical working face 80 yds. long in a seam of coal 3 ft. thick, dipping 1 in 6, where a coal-cutter and conveyor are used. Assume your own conditions. (60) 2. A shaft 20 ft. diameter is in course of sinking. Show by sketches the positions of the shot-holes as the work proceeds. Give the method of firing you would adopt. (60) 3. What are the causes of miss-fired shots? State definitely what you, as shot-firer, would do if a shot had missed fire. (80) 4. Describe the process of recapping a winding rope with a white-metal capple. What merits or otherwise has this form of capple over other types? What is the object of recapping within limited periods? (60) 5. A cross-measure drift 12 ft. wide and 7 ft. high is to be driven through strata which require temporary timber supports before the permanent lining can be put in. Describe the work as it proceeds. Give a list of tools required for the driving of the drift, compressed air being available. (60) 6. Describe what you would consider to be a typical day's work for an under-manager. (60) THEORY AND PRACTICE OF VENTILATION. 1. On the plan of a mine which accompanies this paper show how you would ventilate the working faces by means of five separate air-currents (splits) and three air-crossings. Show the direction of each air-current and the positions of air-crossings, doors, stoppings, regulators and sheets, and avoid placing air-crossings in positions in which they would obstruct the haulage. (50) 2. The return air arriving at the bottom of an upcast shaft, after having travelled through the working faces and return airways of an extensive mine, has a temperature of 83° Fahr. How can you deduce the approximate depth of the workings from this circumstance? State the reasons for your answer clearly and methodically. (50) 3. State in detail the respective advantages and disadvantages of blowing or exhausting air through pipes in a single heading and show by means of a sketch how the pipes are coupled to the blowing or exhausting fan. (50) 4. If a cubic foot of air weighs 0.0807 lb. at 32° Fahr. and at a pressure of 14.7 lb. per square inch, how much will it weigh at 80° Fahr. and at a pressure of 31 inches of mercury? (50) 5. If a motor actuating a fan requires to develop 100 effective horse-power in order to cause 150,000 cubic feet of air per minute to pass through the workings of a certain mine, what power would the same or a similar combination of fan and motor require to develop in order to pass 200,000 cubic feet through the same mine, and what would the water-gauge be in each case? (50) 6. Make a careful sketch of a regulator fixed in an air-door. When the opening in the regulator is 2 feet square, what quantity of air at normal pressure and temperature is passing through it f the difference of pressure on its two sides is equal to 2 inches of water-gauge? The opening being square, assume the coefficient of the vena contracta to be 0.60. (50) 7. Show by means of a sketch, in plan and elevation, a suitable apparatus for testing safety-lamps in an explosive current of air and fire-damp, and explain exactly how it is used in making the tests. (50) EXPLOSIONS, &C. 1. Why is it necessary to take samples of dust separately from the floor, roof and sides of a roadway, and what differences would you expect to find in the samples ? (20) 2. State fully all the possible causes of ignition in underground explosions of coal dust or gas. (20) 3. Assume that a fire occurs during working hours in an engine room near the bottom of the downcast shaft, and, as under-manager, you are in the pit in charge, and on the spot. What would you do to get your men out safely and deal with the fire? Make a sketch showing the pits, the roads and the seat of the fire. (20) 4. Make (1) a sketch section of a seam of coal you would expect to be liable to spontaneous combustion, and (2) a sketch plan of your method of working the seam. Describe the advantages you claim for your method. (20) 5. You are in charge of rescue men wearing apparatus underground. The work to be done is 200 yards in-bye of a fresh-air base, and is expected to occupy eight hours. How many men would you require and how would you organise the work? (20) 6. A longwall face is approaching old workings supposed to end in a pair of parallel headings and to contain water. Make a sketch of the working face and the assumed old workings. Show and describe your method of approach and of draining the water. (20) MACHINERY. 1. A cheese weight for stretching a flexible cage conductor is to weigh 2 cwt. as near as may be, and is to be 1ft. 6in. diameter, with a slot 1¼ in. wide running radially from the edge to just beyond the centre so that the weight may be threaded centrally on a 1 1/8in. rod. What will be the thickness of the cheese weight if a cubic inch of cast-iron weighs 0.28 lb. ? (20) 2. A direct double-acting pump with ram Sin, diameter has a suction pipe 3in. diameter and 150ft. long lying at a slope of 1 in 9. How would you start this pump? If the pump refused to raise water, what would you do to discover the cause? If the pump always worked badly, what could be done to improve its behaviour? (20) 3. In connection with electrical plant what is meant by "earthing" ? An electric coal-cutting machine has a frame with gear box and chain and a motor with frame, field cores, armature windings, commutator, field windings and shaft. Which of these parts should be earthed, and for what reason? (20) 4. Make to a scale of one-quarter full size a plan and section of a longitudinal butt joint about 2 ft. in length suitable for a Lancashire boiler with plates ¾in. thick, inside and outside cover plates 9in. wide and ¾in. thick, there being four rows of rivets 7/8in. diameter, spaced 3m. apart centre to centre of rivets in the same row and 1*¾n. centre to centre between rows, the rivets in adjacent rows being staggered. (20) 5. A pinion has 21 teeth and meshes correctly with a spur wheel having 88 teeth. The circular pitch is 1¼in. What is the diameter of the pitch circle of each wheel, and what is the distance from centre to centre of the wheels ? (20) 6. Describe a good type of small haulage gear for operation either by compressed air or electricity and suitable for gathering tubs from the face to the main haulage. (20) ARITHMETIC AND SURVEYING. Arithmetic. 1. An endless rope haulage with tubs attached singly travels at a speed of 1¾ miles per hour. At what distance apart must the tubs be placed on the rope to deliver 550 tons in seven hours' running time? The average weight of mineral per tub is 10½ cwts. (20) 2. If the output per man at the coal face be 107 cwts., and the men at the face be 30 per cent, of the total persons underground and 20 per cent, of the whole of the persons employed, what is the output per man below ground and per person employed? (20) 3. Calculate the volume of the excavation per yard in a shaft 18ft. in diameter in the clear lined with 18-in, brickwork. Assume an average clearance between brickwork and wall of the shaft of 6in. (20) 4. Add 1 5/8, ¼, and 2 1/8 and deduct 3 1/16. Divide the result by ½ Express the answer as a decimal fraction. (20) Surveying. 5. You are informed that a certain place in the workings under your charge has reached a point at which it must be turned to strip the boundary. The boundary is defined on the surface by a wall. How would you proceed to lay off the new line of the place? (20) 6. What is the average rate of change in the Magnetic Meridian? In what direction is it changing, and how would you ascertain the change from time to time ? (20) 7. The following are the relative levels of six points in a road 50 feet apart 10, 14, 13, 15, 18 and 20 feet. Plot a section on a scale of an inch to 20 feet. What is the average gradient from end to end ? (20) MINES ACT, &C. 1. Compulsory Question. -- Write a report on a system of hauling coal underground from the hewer to the shaft bottom at a colliery with which you are familiar. Suggest any alterations which you think might lessen the number of accidents on haulage roads. (20) 2. The main haulage road of a mine requires to be enlarged, and explosives are to be used. State fully the precautions required to be taken and the provisions of the Mines Act and General Regulations which apply. (20) 3. Give a complete fist of the code of ventilation signs specified to be used on the ventilation tracings required to be kept at the mine for the use of rescue brigades. (20) 4. What are the provisions of the Coal Mines Act and General Regulations as to the examination of safety-lamps ? (20) 5. Enumerate the various plans which are to be kept at a colliery office and state the scales on which these plans are to be laid down. (20) 6. State briefly and concisely the provisions contained in the Coal Mines Act and General Regulations for the care and treatment of animals underground. (20) * Questions set at Examinations in May, 1925. The figures in brackets against each question indicate the maximum number of marks obtainable. The plans and sketches have not been reproduced. Price of official copy of questions, obtainable through H.M. Stationery Office, 2s. net.
|
|||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||