|
26th January 1922 Diver In A Frizington MineTownhead Mine Tragedy RecalledDivers are usually associated with seaports, but on several occasions during the past few weeks the unusual spectacle of a fully-dressed diver stepping out of a mine cage has been furnished at Frizington. Owing to the breakage of a neck ring on one of the pumps at the flooded Margaret iron-ore mine, the services of Diver Rimmer, of Barrow, have had to be requisitioned on seven or eight occasions recently to undertake the necessary repair work. The Margaret Mine was closed down in June last and was left untouched until October. Pumping operations were then recommenced, but the mine, which has a 130 fathoms shaft, by that time was totally flooded. About a fortnight ago, on his first visit, the diver had to descend 50 feet below water before reaching the pumps. On Tuesday, the last occasion upon which he had been summoned, the pumps were barely 10 feet below water, and it is hoped in the course of a week to get them totally clear. However, even were this accomplished there would still be some 30 fathoms of water to combat in the shaft. The method of lowering the diver into the shaft is remarkably simple. The big helmet, clogs and lead weights of 170lbs, are not finally attached until the cage is almost on water level. With his assistants on the top platform, the cage is then lowered until the diver's head is barely visible, the boards are taken out of the bottom of the cage, and the diver slowly sinks to his work. On Tuesday Diver Rimmer, working with bare hands, was almost four hours below water before he had sufficiently repaired the pumps to permit their restarting. The adaptability of divers is aptly illustrated in this case by the fact that, after being told of the position of certain tools hanging on nails in the woodwork near the pumps, Diver Rimmer was able to locate these on his third visit and ever since then has utilised and replaced them in position without troubling to come to the surface for tools. Although divers claim that they frequently get infinitely worse tasks, there is a certain element of risk attached to mine work. Seen by our reporter on Tuesday, Diver Rimmer emphasised the need for a diver to have a good memory. In the Margaret shaft, he asserted, there were many holes, and one had to determine the exact course taken in descending in order to return the same way. The air-pipe must also be carefully guarded, and to ensure the success of the operation he had brought with him four assistants. And then there were other incidentals. On Tuesday, for instance he found a cross-piece of timber completely blocking the shaft, and this on removal dropped like a stone. However, divers in mines are not unknown in Cumberland. Diver Rimmer, who is employed by the Furness Railway Company principally on the Barrow dock-gates, has within recent years been down both the Stirling mines, while in March 1913, a diver was employed to release the cage in Townhead mine, in the tragic flooding of which one man lost his life and two others who took refuge in a high working were fed through a bore-hole for almost five days before being finally liberated.
Newspaper transcript kindly provided by
|
|||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||