|
3rd March 1909 The North-East CoastElectricity In CollieriesDarlington, Mar. 1. A complete electrical generating and pumping plant is now approaching completion at the pits of the Wansbeck Colliery Company (Limited), Morpeth. There is a steam dynamo (75 k.w., 250 volts) which supplies current to four circuits, each having a double pole switch and two single pole fuses. Two distribution switchboards, one for each seam, are installed underground in specially prepared rooms near the pit shaft, one having four and the other five circuits. About 1·5 miles of cable have been used underground and this is of the bitumen insulated type, the shaft cables being double wire armoured with a watertight covering, whilst the pit cables are of the same type but unarmoured. The shaft cables are carried by specially long hard wood cleats, and the pit cables are suspended by raw hide suspenders so as to avoid damage from roof falls. For the unwatering of the face in the two seams, as developments proceed, two centrifugal pumps — each capable of dealing with 100 gallons per minute — are installed. They are direct coupled to a totally enclosed electric motor through a flexible coupling, the pump, motor starting and controlling switchgear, and fuses being mounted on one bedplate, which, being fitted with wheels for running on the colliery tramlines, is thus self-contained and may be easily removed to other parts of the colliery as the work progresses. It is anticipated that these pumps will deal with all the water likely to be encountered in the development work, and in conjunction with them a 500-gallon per minute pump of the same design, but not fitted with wheels, is installed nearer the shaft and will be moved further in as the working proceeds. The steam engine was supplied by Messrs. Browett, Lindley, and Co. (limited), of Manchester, the cables by Messrs. W. T. Henleys (Limited), of London, and the dynamo, switchgear, and pumps, were built to the specifications of Mr. C. W. Jordan, consulting mining engineer of Cardiff. The Thrislington Coal Company (Limited) are embarking upon an electrical installation for haulage and pumping purposes at their pits in the neighbourhood of Ferryhill, county Durham, and a preliminary contract has recently been placed with the General Electric Company (Limited), Birmingham, for three 25 h.p. haulages and one three-throw ram pump, delivering 150 gallons against a head of 620 feet. The British Westinghouse Company are also supplying to the order of the Cleveland and Durham Electric Power (Limited) an alternator, 400 k.v.a., three phase, 40 periods, 2,750 volts at 300 r.p.m., for installation at Thrislington colliery.
|
|||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||