|
9th September 1908 The North-East CoastAn Electric Railway For Colliery PurposesDarlington, Sept. 7. The Consett Iron Company (Limited) have lately inaugurated and electrically-worked surface railway for the purpose of hauling coal from the Whittonstall drift to the Chopwell colliery, county Durham, where the coal is cleaned and loaded into railway wagons. The line is about two miles in length. The gradients are somewhat severe, reaching at some locations as much as 5 per cent., the total rise being 250ft. The gauge is 2ft. 2in., and at present the equipment comprises one locomotive, capable of drawing a load of 25 tons. This locomotive is operated by two 56-h.p. motors, and accomplishes the complete journey with the full load in 12min. The locomotive collects the current from an overhead line by means of "bow" collectors. The overhead wire is carried on poles of lattice channel type, fitted with bracket arms to support it above the railway, whilst the poles are fixed in concrete. The line is fed at the Chopwell colliery end by underground cables from a central power station. The ordinary loads consist of 36 tubs, each weighing 5cwt. and carrying 8cwt. of coal. The railway and locomotive equipment was supplied by Messrs. Siemens Brothers, and an order for a duplicate locomotive has lately been placed by the Consett Iron Company with the same firm. Coal Shipping Facilities. Notwithstanding the trade depression throughout the north-east district, coal shipments — and notably those to Continental ports — continue to be active. During last year 17,850,484 tons of coal and coke were shipped from the river Tyne, and 9,507,139 tons were exported during the first half of the current year. The coal-shipping facilities of the river have recently been greatly improved by the introduction of a new staith and hydraulic hoist built for the Tyne Commissioners at Whitehill Point, which is situated between the Northumberland Dock and the Albert Edward Dock, North Shields. The hoist is one of the highest of its type in the United Kingdom, as it deals with gross loads of either 17 or 33 tons through a height of 52ft., and, as the lift commences at 38ft. 6in. from quay level, there is secured a maximum height of delivery of 90ft. 6in. The depth of water alongside at l.w.o.s.t. is about 30ft. The hoist is of the fixed type, direct acting and double powered, with a constant pressure cylinder partially to balance the weight of the cradle. The structure is of steel throughout, erected on piling driven into the river, and the lifting cylinders are contained in a cast-iron casing sunk into the river. The cradle takes only bottom-tip wagons, and is provided with a hopper between the rails, having an inclined bottom and fitted with a hinged mouthpiece controlled by levers from the cradle. From this hopper the coal passes into the main shoot, which has a length of 29ft., and delivers at a maximum height of 64ft. above quay level. By means of a telescopic lengthening shoot an extra 8ft. 6in. is added to the length of the main shoot. The main shoot is adjusted by means of four chains, and is so arranged as to swivel 22deg. on either side of the centre line. The valves for operating the various cylinders are situated in a house at quay level ; endless chains are carried to the top of the structure, and all the motions are controlled from the cradle. The speed of the lift is 120ft. per minute. The hoist was erected by Messrs. J. Abbot and Co., of Gateshead-on-Tyne, and the structural work for the staith was supplied by the Tees Side Bridge and Engineering Works, of Middlesbrough, all to the general specifications and under the supervision of Mr. James Walker, the chief engineer of the Tyne Commission.
|
|||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||