12th July 1906
The Use Of Steam Engines In Mines
As far back as the year 1715, Sir James Lowther realising the enormous advantages of the steam pump invented by Newcomen, put down one of these machines at the Stone Pit, Whitehaven. The engine was not purchased outright, but was apparently hired at an
annual rental of £182. This was merely a rectilinear motion, and the ingenuity of the engineers had not helped them to design an engine which would rotate until 1787. The credit for the first conversion is due to the engineer at the George Pit at
Whitehaven, who, about that time, discarded his horse-ginns and fitted the winding or haulage drum to an overshot wheel, which was worked by the water pumped from the mine by the Newcomen pump.
Another inventor who was at this time studying the same question was Adam Heslop, founder of the Lowca Works, the son of a blacksmith, who, with two brothers, was employed at the Seaton or Barepot Works, near Workington. The chief business at this date
seems to have been the casting and boring of cannon. Possibly Heslop, who evidently had an inventive mind, tired of casting cannon for we find that early in life he left the district and obtained a position with the Madeley Wood Colliery Co.,
Wellington, Shropshire, and probably it was here that he became associated with Stead and the development of the crank. In addition to this remarkable revolution in the engine Adam turned his attention to the general improvement of the engine itself,
and indeed is said to have been the originator of the system of compounding. After completing his design and registering his patent Adam returned home, and joining his two brothers merged the old Seaton Works into a new concern, which they styled the
Lowca Ironworks, taking into partnership one William Stead, brother of the inventor of the crank, a Mr. Johnson, of Whitehaven, Mr. Millward, and a lady named Ritson, the style of the firm eventually becoming Heslop, Johnson, Millward, and Co., the total
capital involved being something under £3,000.
That the engines were of sound construction may be gathered from the fact that one which was probably made about 1790 to 1795 was put down at Kells Pit, then at Castlerigg, and in 1837 was removed to Wreah Pit, which was a part of the Whitehaven
Colliery, and that it worked continuously for 80 years. The details of the engine are as follows :— The arrangement, which is in reality a single high-pressure cylinder with a Newcomen engine, was patented in 1790 by Adam Heslop, although it
appears to have been an infringement of Watt's patent for a separate condenser, which remained in force till 1800. There are two open-topped single acting cylinders, one known as the "hot" cylinder, 34in. diameter by 34in. stroke, being near
the connecting rod end of the beam, while the other, or "cold" cylinder is at the other extremity, although in some cases both cylinders were at the same end. There is also an air pump, 12ft.5in. diameter, by 17in stroke, but this was a later
addition.
The steam, which was supplied by a haystack boiler, on being admitted into the "hot" cylinder raised the piston by its pressure; the return stroke was made by the momentum of the fly-wheel, assisted by the weight of the connecting rod and the
action of the cold cylinder. The exhaust steam from the hot cylinder passed to the cold one by an deduction pipe, which, being immersed in cold water, acted as a condenser to the extent of "killing" or reducing the steam to atmospheric
pressure before it entered the cold or Newcomen Cylinder; here it was condensed by an internal jet so that the atmosphere caused a down or working stroke of this piston.
All of the valves were actuated by tappets on a plum-rod, and any air was expelled from the cold cylinder by a shifting valve which was admitted a blow-through during the upstroke; this has, however, been displaced by an air pump. Pumping was done by a
cast iron beam four or five feet above the main beam and connected to it by links.
It is pleasing to record that one of the old Lowca patternmakers had secured a position at the Kensington Museum, and that it was on his initiative this remarkable engine was saved from eventual destruction.
Newspaper transcript kindly provided by
West Cumbria Mines Research.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Heslop, Adam | | | |
| Johnson, — | | | |
| Lowther, James, Sir | | Mine Owner | |
| Millward, — | | | |
| Ritson, — | | | |