Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Articles by date
Articles by colliery
Personal name index
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious


 Newspaper Articles Index Newspaper Articles 

12th July 1906

Local Records

Two Engineering Chapters In The History Of Engineering

Mr. Cecil Walton, of Orchard House, Moresby, manager of the Lowca Engineering Company's Works favours us with the following interesting contribution, dealing with some little known incidents in the achievements of which the Lowca Company have every reason to be proud :—

Doubtless the age of the Lowca Works is well known to all your readers, but it may not be as generally known that the old place was the scene of two of the most interesting chapters in the history of mechanical engineering. That such is the case is beyond dispute, and as such I venture to think they are worth adding to the local records. As far back as the year 1715, Sir James Lowther, realising the enormous advantages of the steam pump invented by Newcomen, put down one of these machines at the Stone Pit, Whitehaven. The engine was not purchased outright, but was apparently hired at an annual rental of £182 as an "apparatus for raising water by means of fire." This, it, should be borne in mind, was merely a rectilinear motion, and, although to us the conversion of such motion into rotary movement by means of a crank is familiar to all engineers, it must be remembered that at that time, all the ingenuity of the engineers had not helped them to design an engine which would rotate. That they were keenly alive to the importance of the question is evident, but it was not, until 1787 that any method of doing so was adopted. The credit for the first conversion is due to the engineer at the George Pit at Whitehaven, who, about that time, discarded his horse ginns and fitted the winding or haulage drain, to an overshot wheel, which was worked by the water pumped from the mine by the Newcomen pump. It was from this that the district now called the "Ginns" derived its name. It was undoubtedly due to this that engineers, realizing the importance of the change, devoted their minds to the design of some piece of mechanism which should be a part of the engine itself, and we find that one, William Stead, of Birmingham, took out letters patent for the application of a crank to a steam engine. To us the crank is so familiar that we can scarcely conceive that the idea presented any difficulty, and that it was the obvious device, but it must be remembered that in spite of the attention given to the subject the development of the crank was the result of the combined ingenuity of 70 years. It is well-known, indeed, it is put on record by the great mechanical genius himself, that James Watt claimed to have invented the crank, and that during his experiments he was robbed of the idea by a dishonest workman who disclosed the secret to Stead. Personally I am inclined to think that the same idea had occurred to both men at the same time, a thing one so often sees in the present day patent records, and in fact Watt practically admits that such might have been the case. Stead claimed to have taken the idea from the movement of the wheel as his wife sat spinning, and very possibly this is, the true explanation. Another inventor who was at this time studying the same question was Adam Heslop, founder of the Lowca Works, the son of a blacksmith, who, with two brothers was employed at the Seaton or Barepot Works, near Workington. The chief business at this date seems to have been the casting and boring of cannon. The casting of canon at Parton, or near it, to our preset day ideas would suggest an element of humour, but there was no humour in it in those days, but grim necessity. Parton is a much older place than Whitehaven, indeed in the old days, the military halting ground was Parton, not Whitehaven. There was a commodious quay there, and in Whitehaven such was the extent of trade that no less than six shipyards existed, and the town was famous the world over for the excellence of its craft. There was at that time "employment and encouragement for every-one, genteel and rational entertainment and amusement for gentlemen, convenience for the merchant and plenty of work for the mechanic and labourer." It was not a local shipping trade, but world wide. America, Africa, and the West Indies all dealt direct with Whitehaven, and it is on record that, as the chimneys called the "tobacco pipes" erected on Bransty Brows could testify, no less than 20,000 hogsheads of tobacco came into the town annually. Why the cannon? Because we read that from the time of Charles the people of the neighbourhood petitioned for protection from fire and enemies and because those men who left our shore to go down to the sea in ships did so in peril of their lives. The seas were infested with pirates, the worst possibly the world has ever known, their business was done in the very homes of these buccaneers, and so every merchantman sailed fully armed, so that I think, the supply of such armament was but the natural sequence resulting from what was then the most important shipping centre on the West Coast.

Possibly Heslop, who evidently had an inventive mind, tired of casting canon for we find that early in life he left the district and obtained a position with the Madeley Wood Colliery Co., Wellington, Shropshire, and probably it was here that he become associated with Stead and the development of the crank. In addition to this remarkable revolution in the engine Adam turned his attention to the general improvement of the engine itself, and indeed is said to have been the originator of the system of compounding. After completing his design and registering his patent Adam returned home, and joining his two brothers merged the old Seaton works into a new concern, which they styled the Lowca Ironworks, taking into partnership one William Stead, brother of the inventor of the crank, a Mr. Johnson, of Whitehaven, Mr. Millward, and a lady named Ritson, the style of the firm eventually becoming Heslop, Johnson, Millward, & Co., the total capital involved being something under £3,000.

That the engines were of sound construction may be gathered from the fact that one which was probably made about 1790 to 1795 was put down at Kells Pit, then at Castlerigg, and in 1837 was removed to Wreah Pit, which was a part of the Whitehaven Colliery, and that it worked continuously for 80 years. The details of the engine are as follows :—

The arrangement, which is in reality a single acting high-pressure cylinder with a Newcomen engine, was patented in 1790 by Adam Heslop, although it appears to have been an infringement of Watt's patent for a separate condenser, which remained in force till 1800. There are two open-topped single acting cylinders, one known as the "hot" cylinder, 34in. diameter by 34in. stroke, being near the connecting rod end of the beam, while the other, or "cold" cylinder is at the other extremity, although in some cases both cylinders were at the same end. There is also an air pump, 12ft. 5in. diameter, by 17in. stroke, but this was a later addition.

The steam, which was supplied by a hay stack boiler, on being admitted into the "hot" cylinder raised the piston by its pressure; the return stroke was made by the momentum of the fly-wheel, assisted by the weight of the connecting rod and the action of the cold cylinder. The exhaust steam from the hot cylinder passed to the cold one by the education pipe, which, being immersed in cold water, acted as a condenser to the extent of "killing" or reducing the steam to atmospheric pressure before it entered the cold or Newcomen Cylinder; here it was condensed by an internal jet so that the atmosphere caused a down or working stroke of this piston. All of the valves were actuated by tappets on a plug rod, and any air was expelled from the cold cylinder by a shifting valve which was admitted a blow-through during the upstroke; this has, however, been displaced by a air pump. Pumping was done by a cast iron beam four or five feet above the main beam and connected to it by links.

It is pleasing to record that one of the old Lowca patternmakers had secured a position at the Kensington Museum, and that it was on his initiative supported by the untiring efforts of the late Mr. H. A. Fletcher, this remarkable engine was saved from eventual destruction and is now in South Kensington Museum, one of, if not the oldest engines in existence, a monument to the memory of the genius who contrived it and keeping good company by Watts' sun and planet engine, and those monuments of locomotive engineering the Rocket, the Sanspariel, and the Puffing Billy. It is a record of which Whitehaven may be pardonably proud, and standing by its side and in its wonderful surroundings one cannot but marvel at the giant intellects of these pioneers of engineering and to wonder what they would think could they but see the development of their early labours. Apart from the ingenuity displayed in the designing of the engine there is another thought which arises in one's mind. How was it made? There is a little book in existence which shows that at this time the total wages amounted to about £6 per week, and yet there are many departments represented in the construction. The smithy, the foundry, the machine and fitting shops, the boiler yard. How could so many departments be supported by £6 per week? The solution on research is simple. There were no departments in those days. A man who called himself a blacksmith was a man who could, after he had finished his smithing, turn to foundry work, and thence, to fitting machines. Adam Heslop was such a man, draughtsman, designer, manager, traveller, smithy, fitter, moulder, machine-hand, all trades in one, not a "Jack" of all trades, but a master of each, he and all those with him were capable of beginning and completing any piece of work they had in hand. Adam Heslop, a blacksmith, an expert in the boring of cannon, a colliery engineer, a pioneer in that field of engineering which has made England the greatest power in the world, surely such a man is worthy of a place in our memory, one of which the county and town may well be proud.

But there is another chapter of engineering history connected with the old works which although not so revolutionary was another of the milestones marking the development of a great industry. I mean the conception of the Crampton locomotive. Preceding the year 1846, the development and improvements in the design of the locomotive were certainly rapid, but the time came when engineers were faced with a difficulty which was deemed almost insuperable. The broad gauge offered facilities for the construction of large engines which would be steady while running at high velocities. The designers of locomotives for the narrow gauge were considerably hampered however, by the want of space. The following extract from D. K. Clark's work of "Railway Machinery" shows clearly the difficulties with which the engineers of those days had to contend:

"After all that had been done by Stephenson and others to turn out an engine to suit the common gauge, which should combine the three desiderata -power, speed, and stability it was obvious that a low centre of gravity and a high driving wheel were antagonistic elements, and they were assumed to be incompatible. The gauge could not be increased. Engineers had, therefore, to find their additional power longitudinally and upwards: To gain high speeds they assumed a high wheel, and a high wheel required a high boiler. To exert power they adopted large cylinders, and to obtain power they have applied long boilers. Mr. T. R. Crampton has the merit of having solved the problem, in all its fullness, of combining a low centre of gravity with a large wheel and a powerful boiler. He conceived the idea of an extreme driving axle, removing it from under the boiler and placing it in the rear of the fire box. This stumbling block being removed, he lowered the boiler to just clear the axles of the carrying wheels, removed all the machinery to the outside, enlarged the firebox, and rendered every part accessible. Great freedom in every respect was thus gained, and unwanted facilities were offered for properly proportioning the engine. The method of the outside driving wheel, with some minor novelties, formed the subject of a patent by Mr. Crampton in February, 1813."

Orders were obtained for two engines for the Namur and Liege railway, and one for the London and North Western railway, and the building was entrusted to the Lowca Engine Works. It was one thing, however, to design such an engine, but quite a different thing to build it. No one would undertake the forging of so large a driving wheel as 8ft. It was unheard of, and in spite of many trials and failures the Lowca blacksmith foreman was compelled to own he was beaten, and expressed the opinion that the thing and its difficulty would "hurl after him till the day o' judgment." There was at that time, however, a smith named James Colvin, whose son still lives in Parton, who thought he could master the difficulty, and obtained permission to try. I am inclined to think he kept his method to himself, and possibly worked through the night, for it is on record that he produced the finished wheel to his delighted foreman, who after the closest and most critical inspection, exclaimed "Jeames! The hand o' man could ‘na beat it!"

It is abundantly clear, I think, that apart from many other interesting records of a long-established concern, Lowca can claim to have been the earliest home, if not the birth-place of the "rotative engine" and to have set the fashion for the later modern passenger express engines.

Cecil Walton

Orchard House, Moresby

Newspaper transcript kindly provided by
West Cumbria Mines Research.


Names mentioned in this article

 

 Name  Age  Occupation  Notes 
Colvin, James      
Crampton, T. A.      
Fletcher, H. A.      
Heslop, Adam      
Johnson, —      
Lowther, James, Sir      
Millward, —      
Newcomen, —      
Ritson, —      
Stead, William      
Walton, Cecil      
Watt, James      


 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 28 Nov 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print