|
25th October 1862, Page: 5, Column: 6 Large CastingRyhope, one of the largest collieries in the country, is at present worked by one shaft. The owners, however, have determined to proceed at once with the formation of a second one, and for this purpose they have ordered Messrs. Murray, of Chester-le-Street, to erect an engine of 200-horse power, to assist in the sinking of the shaft, and to draw up the coals when it is completed. On Wednesday afternoon, the single cylinder of this engine was cast in Chester-le-Street Foundry, in the presence of several of the gentry of the neighbourhood, including the Rev. J. P. Depledge, Lieutenant Murray, Ensign Gibson, the Misses Shepperson, Miss France, Miss Forster, Miss Gibson, &c. The cylinder, which is 68 inches in diameter, 8 feet 6 inches in length, and 8 tons in weight, was cast with complete success, and the sight was a very interesting one. Some idea of the extent of the casting may be formed when we state that it called into requisition two large smelting furnaces, ten tons of molten metal, and upwards of fifty men, besides three large cranes. When this engine is completed Ryhope Colliery will be worked by three 200-horse power engines, capable of drawing the enormous quantity of 3,000 tons of coal per diem. Messrs. Murray are also engaged in building, for the same mine, two double-engine horizontal engines, of 200-horse power each, for the underground workings.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||