21st October 1856
The Boiler Explosion at Middlesbrough
On Saturday an inquest was opened before Mr. J. R. Sowerby, coroner, on the four men killed by the explosion of a locomotive engine at Messrs. Bolkow and Vaughan's ironworks, Middlesbrough-on-Tees. From the evidence of John Hall, the
foreman of the engineers in the employ of Messrs. Bolkow and Vaughan, and other witnesses, it appeared that the engine which burst had only been completed a fortnight ago, and had not yet been named. Mr. Williamson (killed) was the engineering
draughtsman under whose directions the engine was built, and it was his duty to attend to the testing of the engine. One trial of its strength had been made on Tuesday week, the amount of pressure, according to the engineer's statement, being about 130
lb. to one inch. The engine worked on Tuesday week, moving coal, ironstone, &c., about the yard, but it was found that it leaked at two seams in two or three places. The heads were also off some of the boiler's rivets, and the engine was put into the
shop again on Saturday, the 11th inst., to be set right. There was a seam along the top of the boiler, which, in the opinion of the witness Hall, rather weakened it, the bolts with which the seam was closed not holding so firmly as the solid iron.
The seam was described as Mr. Williamson's own invention. Hall pointed out to Mr. Williamson that the seam would weaken the boiler, but the latter replied that there was no danger. On Friday the fires was lit for the purpose of again
testing the engine, and shortly afterwards the explosion took place. In addition to the seam referred to by Hall, a witness said that he found the saddle of the boiler sprung 1-16th of an inch, and that the rivets must have been forced off by high
pressure in testing the strength of the boiler on Tuesday week. The inquiry was adjourned.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Hall, John | | Foreman | |
| Sowerby, J. R. | | Coroner | |
| Williamson, — | | | |