11th April 1856
Safety Cages
Mr. J. S. Emery's invention consists in furnishing the sides of the pit with two "guiders", or shafts of wood, which by means of clips attached to the sides of the cage, keep the cage even and steady in passing up and down the shaft.
These guiders extend from some feet above the surface to the bottom of the pit, are grooved from end to end, and in the guides are placed toothed iron racks, extending the whole length of the guides. On the top of the cage are mounted two toothed wheels,
and on the same pinions two ratchet wheels, the former turning easily on their axes, and working without any strain or effort on the side racks. There are also on the top of the cage two levers, from the outer extremity of which chains or ropes are
attached to the ring from each corner of the cage. The inner extremity of these levers being acted upon by springs are forced into the ratchet wheels immediately the support is gone from the rope breaking; the large wheels then become fixed in the side
racks. The apparatus is said to be useful as a moveable scaffolding in effecting repairs in the shaft, as, by attaching a rope to a windlass in the cage itself, the workmen may raise or lower himself a few inches at a time, as required.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Emery, J. S. | | Inventor | |