On March 26, 1967, the National Coal Board reduced their Management structure from five levels to three.
Divisions and Groups disappeared and the collieries were allocated to 17 new-style Areas, headed by a Director each responsible to the National Board. The Doncaster Area is one of the 17.
These Areas are very large undertakings. On average, each has a labour force of 26,000 men, employs £50 million capital and has an annual turnover of £51 million. Each Area is, therefore, a bigger concern in terms of capital and labour than many nationally-known firms, including for example, Kodak and Mobil Oil.
Doncaster Area Director: P. G. Tregelles, N.C.B. Offices, St. George's, Thorne Road, Doncaster.
Yorkshire Regional Sales Director: J. Menheneott, Ranmoor Hall, Belgrave Road, Sheffield 10.
Regional Public Relations Officer: Fred Sanderson, Coal House, Civic Centre, Doncaster.
Collieries
Askern Main, Nr. Doncaster: Sunk 1911-16; works the Warren House seam at a depth of 566 yds. 1,750 men produce 700,000 tons a year.
Bentley, Nr. Doncaster: Sunk 1905-9 to develop the Barnsley, 624 yds. deep; the Dunsil seam was developed in 1940 from the Barnsley level and now provides the greater part of the output; 1,770 men produce 700,000 tons.
Brodsworth, Woodlands, Nr. Doncaster: Two of the three shafts were sunk 1905-7 and another in 1923 to develop the Barnsley, at 595 yds. The original shafts were deepened to 842 yds. in 1920 to allow development of the Parkgate and Thorncliffe seams; 2,550 men produce 1,500,000 tons.
Bullcroft, Carcroft, Nr. Doncaster: Sunk 1909-11 to work the Barnsley at 660 yds. The Dunsil seam is now the main producer. 1,200 men produce 550,000 tons.
Goldthorpe/Highgate, Goldthorpe, Rotherham. Goldthorpe sunk 1910 to work the Shafton at 65 yards; reserves to the east of the colliery are more than 300 yards deep, In 1958 shaft coal-winding was replaced by a 2,000-yard drift mine (sloping) from the surface, and this is also used to convey output from Highgate Colliery workings direct to the surface, 750 men produce 650,000 tons. The companion pit, Highgate, was sunk in 1916 to work the Shafton at 50 yards. The shafts were replaced by surface drift mines in 1948 and these were used until 1966 when the underground connection enabled output to surface at Goldthorpe. 620 men produce 600,000 tons. The two pits are now combined under the control of a colliery general manager.
Frickley/South Elmsall, Pontefract. Frickley sunk 1903-5 to work the Barnsley at 664 yards. The Dunsil seam now provides the major part of the output. 1,850 men produce 800,000 tons. South Elmsall, sunk 1923 to the Shafton at 236 yards, shares common services with Frickley. 650 men produce 350,000 tons. The two pits are now combined under the control of a colliery general manager.
Hatfield, Stainforth: Sunk 1911-16 to the Barnsley at 858 yds.; also works the High Hazel seam; 2,150 men produce 800,000 tons.
Hickleton, Thurnscoe, Rotherham: The first two shafts were sunk 1892-94 to the Barnsley which was worked out by 1955. In 1921 one of the original shafts was deepened and a new shaft sunk to the Parkgate at 789 yds. 2,150 men produce 750,000 tons from the Parkgate and Newhill seams.
Markham Main, Armthorpe, Nr. Doncaster: Planned before 1914 but sinking was not completed until ten years later when the shafts reached the Barnsley, still the main producer, at 730 yds.; 2,100 men produce 750,000 tons.
Rossington, Rossington, Nr. Doncaster: Sunk 1912-15 to the Dunsil at 888 yds., but most of the output now comes from the Barnsley. 2,150 men produce 900,000 tons.
Yorkshire Main, Ellington, Nr. Doncaster: Sunk 1909-11 to 924 yds.; 2,160 men produce more than one million tons from the Barnsley and Dunsil. The Barnsley provides most of the output.
Thorne, Moorends. Sinking began in 1909 but not completed until 1926 when the shaft reached the Barnsley at 924 yards. The decision was made to work the High Hazel at 862 yards and this seam only was worked until 1956 when the colliery was closed for shaft repairs and reconstruction. Shaft repairs were completed in December 1965. The coal preparation plant which formed part of the reconstruction scheme is in operation dealing with imported coal from other collieries in the area.
Points Of Interest
The two most notable buildings in Doncaster are the Mansion House, designed by Paine in the 18th century, and the Church of St. George, the work of Sir Gilbert Scott. On the outskirts of the town was the Forest of Barnsdale; its connection with Robin Hood (who is said to have been declared an outlaw at, the market cross of Pontefract just outside the Area boundary) was celebrated by Robin Hood's Well at Barnsdale Bar, on the old North Road, with a superstructure designed by Vanbrugh, re-erected nearby after road alterations. Also just outside the Area boundary (not far from Yorkshire Main colliery) is Conisborough Castle with its cylindrical keep supported by six buttresses standing high above the River Don. Selby, several miles north of Askern Colliery, is of interest as an inland port on the River Ouse with small steamers coming to quays not far from the Abbey Church of the virgin and St. Germanus, considered one of the most splendid monastic churches in Britain. Part of the Area's northern boundary runs approximately East-West along the Dutch River, a canal cut by Vermuyden the Dutch engineer employed by Charles I to form a connection between the Rivers Don and Ouse. This is part of the main feature of the region, a land drainage system extending from Bentley Colliery, Doncaster, to the Isle of Axholme and covering the 'take' of many Doncaster Area collieries.
Bibliography
Rise of the British Coal Industry. J. U. Nef. (Routledge & Sons)
The Miners. R. Page Arnot. (George Allen & Unwin).
Reid Report. (H.M. Stationery Office).
The Coal Industry of the Eighteenth Century. T. S. Ashton & J. Sykes (Manchester University Press).