On March 26,1967, the National Coal Board reduced their Management structure from five levels to three.
Divisions and Groups disappeared and the collieries were allocated to 17 new-style Areas, headed by a Director, each responsible to the National Board. Barnsley is one of the 17.
These Areas are very large undertakings. On average, each has a labour force of 26,000 men, employs £50 million capital and has an annual turnover of £51 million. Each Area is, therefore, a bigger concern in terms of capital and labour than many nationally known firms, including, for example, Kodak and Mobil Oil.
Barnsley Area Director, E. Hoyle, N.C.B. Office, Grimethorpe, Nr. Barnsley.
Yorkshire Regional Sales Director, J. Menheneott, Ranmoor Hall, Belgrave Road, Sheffield, 10.
Regional Public Relations Officer, Fred Sanderson, Coal House, Civic Centre, Doncaster.
Collieres
Among the Area's major units are the following:
Barley Hall, Thorpe Hesley, Nr. Rotherham: Shaft, sunk 1886/87, is 165 yds. deep; surface drift for coal, preparation at Smithy Wood Colliery (transported by road); 410 men produce 193,000 tons annually from Low Fenton seam.
Barrow, Worsbrough Bridge, Barnsley: Three shafts, sunk 1875, two 372 yds. dp.) (with common pit-bottom for coal output at 335 yds.); third winds men and materials, to 308 yds. level; output from Wombwell Colliery's Lidgett seam also conveyed to central loading station and thence to surface; 1,300 men prod. 676,000 tons from 100 per cent. mechanised workings in Swallow Wood, Lidgett and Parkgate seams, and developing Thorncliffe.
Bullcliffe Wood, Denby Dale Road, Bretton West, Nr. Wakefield: Established 1927, now a complex of drift mines: two established 1956; No. 4 is 405 yds. long at 1 in 4, equipped with 36 in. conveyor delivering into surface surge bunker and No. 5 is 469 yds. long at 1 in 4 used for ventilation and travelling; 290 men prod. 251,000 tons from Top Haigh Moor seam.
Caphouse, Overton, Nr. Wakefield: Probably established 1828; three shafts sunk 1870, including Caphouse shaft 146 yds. dp. now used for coal-winding (Hope Pit & Inman Shaft 215 yds. and 97 yds. dp. respectively used for services and ventilation); 230 men prod. 127,000 tons from Beeston seam.
Crigglestone, near Wakefield: Established 1889; Two shafts (both sunk 1898) 312 yds. one 213 yds. deep to Haigh Moor and one to Beamshaw for pumping only. Coal conveyed to pit bottom then into 2½ ton-mine cars. 650 men produce 214,000 tons from Top and Low Haigh Moor and Lidgett seams.
Darfield Main, Wombwell, Nr. Barnsley: Two of the three shafts sunk 1860 to 342 yds.; one now filled to 224 yds.; a third shaft, 627 yds. dp. is used for winding all coal from Beamshaw level at 224 yds.; 970 men prod. 388,000 tons from 100 per cent. mechanised Meltonfield, Winter & Beamshaw seams.
Dearne Valley, Little Houghton, Nr. Barnsley: Surface drift established 1903 on the outcrop with subsequent development following the Shafton seam; there are now four main roadways; operated pillar and stall working to 1965, now 100 per cent. mechanised; 390 men prod. 130,000 tons annually.
Denby Grange, Netherton, Nr. Wakefield: Established 1894; Two shafts (171 and 164 yds.) for production and a shaft and a drift (1,200 yds. long) for ventilation. Output from New Hards and Wheatley Lime. 240 men prod. 98,000 tons.
Dodworth, Nr. Barnsley: Consists of two shafts sunk 1850 and subsequently deepened to 265 yds.; a surface drift (1962), and two satellite units in Redbrook and Higham, whose output surfaces through a drift and is conveyed overland to Dodworth by means of cable belt conveyors. All the workings are fully powerloaded; 1,460 men prod. 739,000 tons from Winmoor, Top Haigh Moor & Fenton seams, and developing Silkstone.
Emley Moor, Emley, Nr. Huddersfield: Established about 1850; operates shaft 128 yds. dp. (for men and materials only); and two surface drifts, including Skelmanthorpe mine equipped with 30 in. conveyor delivering to coal prep. plant about 2 miles from the colliery; 290 men prod. 121,000 tons from Blocking & Beeston seams.
Ferrymoor, Grimethorpe, Nr. Barnsley: Sunk 1915/16, is 72 yds. dp.; operated pillar and stall system until 1965, now 100 per cent mechanised; 520 men prod. 163,000 tons from Shafton seam.
Grimethorpe, Nr. Barnsley: Sunk 1894, deepest shaft now 926 yds. dp.; major combined mine reconstruction completed 1963 enables nearby Houghton colliery output to be wound and prepared; one shaft dealing with output from upper seam coals of both collieries, the other with lower seams. All the working faces are mechanised; 1,890 men prod. 526,000 tons from Meltonfield, Winter & Parkgate seams.
Houghton Main, Little Houghton, Nr. Barnsley: Two shafts sunk 1873/78 (deepened 1919/21); third shaft sunk 1 924/28 (deepened 1937/40 to 823 yds.); all the output from fully mechanised workings is transported underground and wound at Grimethorpe colliery; 1,590 men prod. 753,000 tons from Beamshaw, Parkgate and Winter seams.
Newmillerdam, Nr. Wakefield: Established 1929; Drift Mine, Output conveyed to surface direct into screens. Manriding and return ventilation by satellite drift, 180 men prod. 84,000 tons from Kents Thick.
North Gawber, Mapplewell, Nr. Barnsley: Two of the three shafts sunk 1850/52 have been filled in; the Lidgett coal-winding shaft, sunk 1926, was focal point of merger with nearby Darton colliery in 1948; one of two surface drifts has now been extended and carries the whole of the output; 1,160 men prod. 346,000 tons from Top Haigh Moor, Low Haigh Moor & Lidgett seams.
Park Mill, Clayton West, Nr. Huddersfield: Established 1850/60; pioneered coal-cutting machines 1880; this colliery is served by two shafts about a mile apart; Park Mill 73 yds. dp. sunk 1891, and Springwood 85 yds. dp.; one of three drifts (1 in 3.75) (1952) is now used for conveying coal from underground locomotive horizon; 310 men prod. 143,000 tons from Wheatley Lime, Top & Low Fenton seams.
Rockingham, Birdwell, Nr. Barnsley: Three shafts sunk 1873/5; Two (355 yds.) used for coal winding from Flockton (169 yds.) and near Thorncliffe (301 yds.). Other shaft at Hoyland Silkstone (508 yds.) used as a service shaft from Top Fenton level. Satellite drift mine at Skiers Spring established 1952 working shallow areas of Swallow Wood. All working faces mechanised; 1,680 men prod. 828,000 tons from Harley, Swallow Wood, Flockton Thick, Low Fenton and developing Lidgett.
Shuttle Eye, Grange Moor, Nr. Wakefield: Established about 1862; Two shafts for coal winding 195 and 288 yds. Ventilation assisted by two drifts at Gregory Spring which was combined with Shuttle Eye in 1962. 230 men prod. 96,000 tons from Beeston and Black Bed.
Smithy Wood, Chapeltown, Nr. Sheffield: Established 1890 ; Main transport is a cable belt in an incline 2,770 yds. in length from surface. Two shafts and a drift (Thorpe) used for ventilation, men and supplies. All output from mechanised faces. 590 men prod. 210,000 tons from the Lidgett.
South Kirkby, Nr. Pontefract: Originally established 1880; two of the three shafts (deepest 812 yds.) are equipped with balanced skips; other shafts situated at Hemsworth are used for ventilation and man riding; 2,640 men prod. 1,181 ,000 tons from Meltonfield, Beamshaw, Barnsley & Dunsil seams.
Wentworth Silkstone, Stainborough, Nr. Barnsley: Orig. 1856. Two surface drifts. Established 1912; extended 1955/59 dipping at a gradient of 1 in 5 to the Whinmoor seam which provides all the output, wholly cut and loaded by machines; 550 men prod. 422,000 tons annually.
Wombwell Main, Wombwell, Nr. Barnsley: Earliest of three shafts, sunk prior to 1853 (277 yds. dp.) ; deepest of two later shafts sunk 1885,1892, is 579 yds.; output from Kent's Thin workings conveyed direct by surface drift to screens, and from Lidgett seam via underground roadways to Barrow colliery. All output is won by powerloaders; 800 men prod. 260,000 tons annually.
Wharncliffe Woodmoor 4 & 5, Carlton, Nr. Barnsley: Established 1879. Drift dipping at 1 in 3.8 ft. 940 yds. from surface eliminated shaft winding in 1957. No. 5 shaft is used for men and materials only. Output is totally conveyed from mechanised units to surface drift; 960 men prod. 395,000 tons from the Kent's Thick.
Woolley, Darton, Nr. Barnsley: First established 1869; working Barnsley seam from outcrop. Shafts to lower seams 1912, two additional shafts 1942 and 1959/1961; the latter the deepest at 613 yds. and providing ventilation for all seams sited about one mile from the pit. Two coal-winding shafts (Nos. 2 and 3) fitted with skips; capable of drawing 620 tons an hour; 2,000 men prod. 846,000 tons from Lidgett, Fenton, Thorncliffe and Silkstone. The whole of the production is mechanised, including a proportion by R.O.L.F. (Remotely Operated Longwall Face).
Points Of Interest
The focal point of the Area, is the mining town of Barnsley, with impressive civic buildings and the Locke Park presented by Joseph Locke, who aided the development of the locomotive and railways after his apprenticeship with George Stephenson; The Barnsley Chop reported the largest in the country, is known all over the world; but there are also collieries near Pontefract, with its ruined Norman stronghold; Huddersfield, with Tolson Memorial Museum devoted to the cloth industry; Wakefield, cathedral with tallest spire in Yorkshire, Georgian houses and restored bridge chantry chapel, and Rotherham, with another fine bridge chapel. Buildings of historic and architectural interest near Barnsley include: Monk Bretton Priory (National Trust) 3 miles from town centre; cannon Hall, Cawthorne, the 11th century All Saints Church at Darton, nr. Woolley colliery; St. Peter's, Tankersley, dated 1330, and the 12th century Kirkstead Abbey, at Thorpe Common, early site of mining.
Bibliography
The Yorkshire Coalfield. L. Slater & A. M. Wandless, Institute of Fuel Journal Fed. 1958.
Rise of the British Coal Industry. J. U. Nef. Routledge and Sons. The Miners. R. Page Arnot. George Allen and Unwin.
The Coal Industry of the Eighteenth Century. T. S. Ashton and J. Sykes, Manchester University Press.
Coalmining. I. C. F. Statham.