![]() |
50 Questions and Answers on British coalPresent Problems and Production13. What is the "large coal" problem? Run-of-mine coal is a mixture of all sizes of coal, from large pieces more than 8 in. across down to the finest dust. At the surface it is graded into sizes to meet the needs of various classes of consumer: the finest coal is used in power stations, while the greatest demand for large coal (3 in. and more across) is from householders and the railways. Intermediate sizes are used mainly by industrial consumers, gas works and coke ovens. Since the war new techniques of mining coal have been developed, and machines have been introduced at the coal face in increasing numbers under the mechanisation programme. These new methods, an essential part of modern mining, tend to break up the coal more than traditional methods, and the proportion of large coal produced fell from 35.2 per cent of total deep-mined disposals in 1947 to 24 per cent. in 1957 — a drop of 13.5 million tons in ten years. Because of this, it was necessary to import substantial tonnages of large coal from 1954 to 1957. In 1957 the Government decided that imports should cease when existing contracts had expired, which meant that in future the Board had to make up these tonnages from their own resources. They took vigorous steps to tackle the problem by improving production techniques, and the prices of industrial coals were also revised to encourage industry to use smaller sizes and free more large coal for the house coal market and the railways.
14. What is being done to improve coal cleaning? Table 2 on page 22 shows how the amount of free dirt in the seams being worked has almost doubled since 1938. Greater use of explosives and increasing mechanisation have also had their effect, and in the last decade there has been a considerable increase in the amount of dirt discarded from the output. The Board have a big programme for installing cleaning plants; already 324 washeries capable of dealing with over 128 million tons of coal a year have been installed since 1947. A further 48 new plants with a yearly capacity of 20 million tons have been authorised or are under construction.
15. Has performance improved since nationalisation? The best indication of performance is productivity, measured on a basis of output a manshift (the average output of each man for every shift worked). Britain’s miners were the first in Europe to return to the pre-war rate of output a manshift; the rate has continued to improve, and in 1961 it was at a record level. Every increase of 1 cwt. in the overall O.M.S. means another 6 million tons of coal a year. Between 1947 and 1957 annual deep-mined output rose from 186.5 million tons to 201.1 million tons, an improvement brought about by increased mechanisation, harder work by the men, better deployment of the manpower available, and reorganisation and concentration of effort in the more productive pits. The miners have a basic five-day week, but from the end of 1947 to mid-1958 they voluntarily worked a sixth Saturday shift in order that the industry could meet the nation’s demand for coal. More than 100 million tons of coal were produced by this Saturday working. Since 1957 output has been reduced as a result of measures taken by the Board to cope with a fall in the demand for coal.
16. Is anything being done about fuel efficiency? Although an increase in the efficient use of coal involves a drop in consumption by the consumer concerned, the Board are anxious to promote increased efficiency in coal utilisation. The coal industry is facing competition from alternative fuels, and coal is most competitive when burned on modern equipment. The Board are big users of coal themselves, and take care that every possible economy is made in their own consumption. In 1948, when production was 196.7 million tons, the collieries used 11.3 million; in 1961, 181.9 million tons were produced but consumption had been reduced to 4.5 million. These figures do not fully reflect the progress made, as much saleable coal has been replaced by unsaleable qualities. In the opposite direction, they are influenced by the fact that the industry is using more power in the form of electricity from the public grid. However, the Board’s own fuel efficiency service has undoubtedly obtained important results, though much still remains to be done. The National Industrial Fuel Efficiency Service, sponsored by the British Productivity Council at the request of the Minister of Power, provides an advisory service for general industry, replacing one operated by the Ministry with good results, but on a smaller scale. The Board agreed in 1953 to subscribe to the N.I.F.E.S. for five years and in 1958 this guarantee was extended for a further five years. By the end of 1961 the Board had contributed a total of £1,708,500 to the service. In 1959 the Board also set up their own service of fuel technologists to advise industries on the most efficient use of coal. There are equally great possibilities for fuel economy in the household use of coal and the Board also support the Solid Smokeless Fuels Federation and the Coal Utilisation Council which encourages householders, local authorities and others to replace old-fashioned and inefficient appliances with modern grates, stoves and cookers. The Board’s Housewarming Plan enables householders and others to spread payments for solid fuel appliances and central heating systems over periods up to five years.
17. What causes mining subsidence? In "longwall" working, which is the method of working mainly used in this country, once coal has been extracted from the seam the roof supports are removed. This means that the strata above the workings fall, as the support given by the coal in the seam has been lost, and the result is that the level of the surface drops by an amount roughly proportional to the thickness of coal removed. The amount of subsidence is also affected by the depth and width of the workings, and the methods of working are planned to minimise the amount of surface movement. Whether or not an owner of land or buildings was entitled to compensation for subsidence damage was formerly a complicated matter depending on the terms on which the mineral rights of the land were originally disposed of. However, as a result of the Coal Mining (Subsidence) Acts of 1950 and 1957, the National Coal Board are now required to remedy damage to any property caused by subsidence, or make a payment instead; to provide or pay for temporary accommodation when houses are so badly damaged that people are rendered homeless; and to pay damages if anyone is killed or seriously and permanently disabled by an accident caused directly by subsidence and there is no other claim for damages.
18. Are mining conditions difficult in Britain? Conditions are difficult compared with many countries. The thicker and better coal seams are being worked out and, as Britain’s coal industry developed much earlier than in many other countries, and the pits are therefore older, the distance from the shaft bottom to the coalface is frequently greater — two important factors which affect the cost of the coal. In many coalfields seams are heavily faulted (Table 2, page 22, shows how the better and thicker seams are becoming exhausted.) The average thickness of the seams now being mined is about 4 ft., and the average depth of workings is some 390 yards. In the future the Board will have to go deeper for their coal. All the new shaft mines begun or authorised since 1946 will work coal deeper than 600 yards.
19. What methods of mining are used in Britain? The main methods of working coal used in Britain are "longwall" and "room and pillar". In the first method, the coal is won along the whole of a long face in the seam and extraction is usually complete. In the room and pillar method, however, extraction is only partial and large pillars of coal are left behind to support the roof. Longwall methods account for over 90 per cent, of total output.
20. Is mechanisation being pressed forward? The development of mechanisation in the coalmines and its effect on output is shown in Table 4, page 24. It is seldom possible to develop machines which have a universal application in every coalfield or to achieve anything like the "assembly line" methods common in a modern factory, but the unified industry has been able to pool the resources of its engineers in the search for new techniques, obtain the most up-to-date knowledge from abroad, call for scientific investigation to explore fundamental problems, and make all this information available throughout the coalfields. Under this stimulus many new machines and mining methods have been introduced. There was virtually no power-loading until after the war, but the percentage of power-loaded coal rose from 3 per cent, in 1949 to more than 8 per cent, in 1954, and about 48 per cent, of annual deep-mined output was won and loaded entirely by machines in 1961. It is expected that by 1965 80 per cent. of all the Board’s output will be power-loaded. It has been much easier to introduce power-loading into room and pillar workings owing to the greater amount of space in the "room" of coal to operate the gathering-arm type of loader commonly used in America. The Continuous Miner, an American machine first installed at Donisthorpe Colliery, Leicestershire, in 1950, has been extremely successful and 41 machines are now operating. But despite the almost phenomenal rate of output (as high as 30 tons a manshift at the face) it cannot be widely used. The deeper longwall workings are harder to mechanise; there are two main types of machine, employing either a cutting or ploughing method to get the coal. Most common is the cutting method in which picks mounted on a revolving chain attack the coal. The most successful machines developed so far have been the Anderton Shearer Loader, the Trepanner and the Meco-Moore. First installed in 1952, the Anderton Shearer proved its worth very quickly and by the end of 1961 there were 467 machines at work. The design is simple, with a drum fitted with picks which revolves against the coal face; it cuts and loads the coal on to a conveyor in a single action. The Anderson Boyes Trepanner, which employs a revolving head to cut the coal in a coring action, is particularly valuable in the drive for more large coal, as it produces a higher proportion of large coal than some other machines. By the end of 1961, 228 Trepanners were at work. The A.B. Meco-Moore is a 10-ton giant with separate cutting and loading sections: there were 82 operating at the end of 1961. Other cutting machines include the Gloster Getter, which is similar to the A.B. Meco-Moore but has a simplified loading device: the Multi-Jib Loader which is likely to be suitable for work in thin seams, especially for coking coal where breakage is not important; and the Dosco Miner, a Canadian machine which employs a bank of cutting jibs to rip the coal and fling it back to be loaded by a small transverse conveyor. The ploughing or stripping methods, developed in the soft coal of the Ruhr, have been adapted for use in British mines and many types of plough are being tried. Slow-moving ploughs with a series of blades taking a strip up to 12 in. deep have done useful work, but the faster ploughs, which strip off from 2 in. to 6 in. of coal at a time and are driven from the conveyor gearhead by means of chains, are proving more successful in British conditions. At the end of 1961, 184 rapid ploughs were in use. A similar device, the Scraperbox Loader, in which a series of bottomless boxes are fitted with cutting knives which dig into the coal and bring it down for the boxes to load off, is showing promise. More installations are planned. An interesting variation of the ploughing system in the Huwood Slicer, with an electrically activated blade which simulates the movement of a miner’s pick, taking a cut about 12 in. deep. By the end of 1961, 30 Slicers were working, and were giving encouraging results in terms of output of large coal. A most effective contribution is being made by flight loading, which is a combination of conventional and new methods. An ordinary coal cutter makes a normal slotting cut to weaken the coal; explosives bring the coal down, and the same cutter uses its jib fitted with flights, or merely its picks, to push the coal on to the conveyor. Mechanising the work of shovelling the coal is starting to make a big contribution to national output. This effort is being intensified and the mining manufacturers are co-operating in the drive to install more machines. The effort is well worth while, for it is estimated that a faceworker on a power-loaded face produces about 116.3 cwt. a shift compared with 83.5 cwt. average over all faces (these figures are on a pithead basis). Progress would not have been possible without the new type of armoured conveyor and quick-release pit props which help to speed up the rate of advance. This conveyor, which is placed against the face, can act as a loader when the coal is blown down by explosives: about 1,450 of them are now being operated, both with and without power-loading machines.
21. What is the Board’s rate of expenditure on capital equipment? The Board spent £934 million on capital account in 1961. The expenditure covered the cost of replacing worn-out assets as well as additions and improvements to collieries and coke ovens.
22. Apart from coal getting, what other important operations are being mechanised? The Reid Technical Advisory Committee considered that no operation offered more scope for improved efficiency than underground transport and the Board have concentrated on installing locomotives for greater speed and mine cars with higher carrying capacity. The number of locomotives in British mines has risen from 80 in 1946 to 1,286 in 1961, 886 of these being diesel-driven and the rest electric. Nearly 60,000 mine cars in sizes ranging from 1½ to 6 tons have been installed and millions of feet of conveyor belts have replaced hand-tramming and pony and rope haulages. All this new equipment has meant better deployment of manpower and the numbers employed on haulage have fallen considerably since 1947 as a result of reorganisation underground, in spite of a considerable rise in the tonnage handled. While diesel and battery locomotives continue to give good service, electric trolley wire locomotives have been installed at two collieries and provide a more efficient method of haulage if conditions are suitable and the more onerous safety regulations are acceptable. There are nearly 13,000 miles of underground roadway in Britain’s coal mines and about 2,350 miles of roadway conveyors.
23. Are pit ponies still used? There are now fewer than 7,000 ponies and horses in British mines; the number has fallen from 49,000 in 1930 and 30,000 in 1940. Further reductions in the number of horses underground may be expected to follow from increased substitution of mechanical transport for horse haulage.
24. What is Opencast Mining? Opencast mining is the winning of coal by removing the earth above the coal seam and then extracting the coal by mechanical means. It is the most efficient and cheapest method of winning coal close to the surface. Since 1942 over 200 million tons of coal have been produced by this means. Opencast mining is carried out by civil engineering contractors on behalf of the Board. After all the coal has been extracted from an opencast site great care is taken to restore the land to its previous condition and contours.
25. What is the extent of the Board’s carbonisation and by-product activity? In 1961 the Board produced 5.4 million tons of coke and breeze; they also produced for sale 56,000 million cubic feet of gas, 341,000 tons of crude tar and 21 million gallons of crude benzole. Their secondary by-product plants distilled 206,000 tons of crude tar and other material, and rectified 26 million gallons of crude benzole and other material, producing motor benzole, pure benzole, and a variety of industrial fractions such as toluoles, xyloles and naphthas for use by the chemical and plastics industries. Sulphate of ammonia sold for use as fertiliser totalled 59,000 tons.
26. What is methane drainage? The natural gas emitted from coal-bearing strata whenever mining operations occur is known in the mines as firedamp. Its main constituent is methane, which can be highly inflammable in certain concentrations and causes nearly all the explosions which happen in mines, in recent years techniques have been developed for draining firedamp from the strata in coal mines through pipes to the surface. This renders the pits safer for the miners and makes it possible for otherwise gassy seams to be more fully and easily exploited. This safety factor is the main consideration, but where methane is removed in sufficient concentration it can be used in gas engines for steam raising or supplied to local Gas Boards. By the end of 1961 there were 103 methane drainage installations at British collieries; 75 million cubic feet of gas a week were used at collieries or sold.
|
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||