|
A haulage hand was killed on a main and tail landing at Ravensworth Shop Colliery, Durham, by a runaway set of 26 full tubs from a similar landing 170 yards inbye. The road and the landings rose inbye at 1 in 36. An experienced haulage attendant on the inbye landing opened the full-road chock before taking out 24 front wheel drags from a set of 36 full tubs. The tail rope had been attached to the inbye end of the set but when the tubs "strained on" a substantial coupling crook broke. The landing chock should not have been opened until the tail rope was in tension but in such circumstances it would have been no more than good mining practice to have a runaway protection device on the rise side of the outbye landing. Even where the gradient is less than 1 in 12 prescribed by statute it is surely only common sense to provide such protection where it is likely to be effective to prevent accident. The recommendation of the Royal Commission on Safety in Coal Mines which reads: "No person should work without protection in any place where he is exposed to injury from a runaway tub" goes to the root of the matter.
|
|||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||