|
A wagonwayman was killed at Bearpark Colliery, Durham. A set of nine full tubs was to be run outbye from a landing by a main and tail haulage. The landing had a dip outbye of 1 in 22 and the landing boy, after attaching the ropes to the set, withdrew the drags from the tubs and signalled the engineman to haul outbye. The eighth and ninth tubs were not coupled and when the main rope tightened the foremost eight tubs ran uncontrolled for 135 yards, became derailed at a curve and struck the wagonwayman. The accident would have been averted had the landing boy obeyed instructions and examined the set before giving the signal to haul outbye. Instructions were afterwards issued that the full sets must be stretched on the tail rope before the drags and the stop-block are withdrawn. As an additional precaution, a runaway arresting device was installed on the incline. Runaway switches or similar contrivances are required by statute in connexion with such systems of haulage if the use thereof is practicable and the gradient exceeds 1 in 12. It is, however, no more than good mining practice to install them wherever they are likely to reduce the risk of accident in the event of a runaway.
|
|||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||