|
A coal hewer was killed at Murton Colliery, Durham, while walking inbye to his work. On reaching an offtake on an auxiliary main and tail haulage road 4 ft. 6 in. high, and 6 ft. 6 in. wide, he attempted to travel round a two chain radius curve. He was struck by the first tub of a set of sixty, which was being drawn outbye at a speed of about five miles per hour on a gradient of 1 in 36, and dragged a distance of 20 yards. He had been warned by a landing attendant that the set was approaching the curve. Travelling round the curve was forbidden while the ropes were in motion, and notices to this effect were conspicuously posted at both ends of the curve.
|
|||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||