|
A master shifter was killed at Whitburn Colliery, Durham. A 20-inch flat belt face conveyor 80 yards long, with driving gear comprising a compressed-air driven turbine and tandem wood-lagged pulleys, was being moved forward. The pullers removed a cover plate from between the driving pulleys and the top belt then, taking the end of the top belt near the driving gear, ran the machinery slowly in reverse whilst they pulled the bottom belt from underneath the covering pans and through the driving gear into the new track. The master shifter arrived in the mothergate and apparently observed the belt slipping on the driving pulleys. With the intention of helping the pullers, but without their knowledge, he pressed with his hands on the belt to increase the friction between it and the front pulley. The belt looped and was drawn into a space two inches wide between the front pulley and a frame cross-stay. His arm was drawn in with the belt and he sustained fatal injuries. The space between the cross-stay and the pulley was afterwards reduced and a guard designed for use when running the machinery in reverse to take the belt off. The method of moving forward the conveyor recommended by the manufacturer is safer. In this method the top and bottom belts are disconnected near the driving gear and the belts moved forward piecemeal without the use of the machinery.
|
|||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||