|
A blacksmith was killed at Hartley Colliery, Northumberland. A footbridge was being moved in sections by a hand-operated crane weighing 14 tons. The crane was permanently mounted on a railway truck, and was thought to be capable of lifting a load of five tons. It had been in use for a number of years. When loaded with a portion of the bridge, which was estimated to weigh some 2½ tons, the jib was slightly slewed from its normal position parallel to the rails on which the truck was standing. The operation of slewing resulted in the crane tippling over in the direction in which the jib had been slewed. Deceased, who was assisting to operate the crane, was killed and another man injured while attempting to jump clear of the falling structure. The accident indicates that little was known about the capacity of the crane, either in respect to the safe load for which it was designed, or the need for a material reduction in the safe load when using the crane on so unstable a base as a railway truck. The crane was subsequently scrapped. As a result of this accident an automatic safe-load indicator was fitted to the remaining crane in use at this colliery. Where cranes are in use I would ask managers to consider the following points (1) the maximum safe load at various radii of the jib should be shown on each crane; (2) for stationary cranes proper anchorage should be provided; and (3) for travelling cranes adequate measures should be taken to prevent the crane from falling over.
|
|||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||