|
A hewer was killed at Dawdon Colliery, whilst walking outbye. Contrary to instructions and without authority he was travelling down a self-acting incline while the sets were in motion. When approaching "meetings," he stepped out of the full into the empty way and was run over by the set. There were provided a 2ft. clear space at one side and sufficient refuge holes but deceased failed to use them. Whilst it may be impracticable to stop the haulage when persons are travelling on long main engine planes, there is no difficulty in doing so on most self acting inclines. To ensure the observance of instructions prohibiting travelling whilst in motion, proper barriers controlled by the brakesman could be erected at the bank head, but it would be much better if managers would adopt the elementary principle of keeping workmen as far away as possible from moving tubs by providing separate travelling roads. This provision would also eliminate accidents due to illegal riding and stumbling which occur whilst persons are travelling in or outbye.
|
|||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||