|
At Thrislington Colliery, Durham, a coal-cutting machineman and his assistant were operating an arc-wall coal-cutter mounted on a tram, in a seam 3ft. Gin, thick, worked bord and pillar. They fixed stays ready for the machine to start cutting 12 inches from the floor in a place 12 feet wide. The machineman was near the jib end and told his assistant to start the machine. The vibration caused the right side stay prop to fall out and the machine and tram immediately swung round. The machineman was caught by the picks, crushed against the side and instantly killed. Apparently the stay, which was tightened by a progressive screw from the machine end had been insecure. If it had been notched into the coal the accident would probably have been avoided, but in any case no one should be at the jib end when cutting in.
|
|||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||