|
An assistant shaftman was fixing a bunton, 8ft. by 9in. by 3in., in the middle of a staple shaft at Barmoor Colliery, Northumberland. He used a hemp rope, 1in. diameter, for lowering the bunton and personally made the lashing consisting of a double reef knot and two half-turns, as he objected to the rope being secured from slipping by means of spikes. The bunton was lowered and he followed in the chair. He found the bunton too long and sent it to the staple top to be shortened. Three workmen at the staple top tightened the half-turns and commenced to lower the bunton again when it slipped through the rope and struck deceased on the shoulder. He died two weeks later.
|
|||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||