|
A horsekeeper was killed at Bewick Main Riding Drift Colliery, Durham. An electrically driven main and tail hauler had been installed at the surface to replace a steam hauler. New ropes were put on and preparatory to running a set the sockets were fastened together and the ropes successfully run light. An empty set of 15 tubs was then tried and the first tub struck a sheave at a turn on the surface about 70 yards from the mouth of the drift, causing the tail rope to become taut and break away from two sheaves placed on the outside of the turn. The rope jumped to a height of 4 feet and pulled across to the inside of the turn. Deceased had been posted at the turn to note the behaviour of the set on its trial run and, in error, he stood on the inside of the turn. He was caught by the released tail rope and instantly killed.
|
|||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||