|
At Bearpark Brancepeth Colliery, Durham, a screen motorman deliberately went inside two fences to the tumbler end of a steel plate conveyor whilst it was in motion. His coat was caught by one of the steel trays and he was drawn against it, sustaining a laceration of the right thigh. It was not thought that he was seriously hurt, but he was at once sent to hospital where gangrene set in and he died four days later. Deceased had been definitely instructed that he must not pass the fences whilst the machinery was in motion. From the reports of my staff it is clear that more attention should be given to the adequate fencing of all machinery. The statute is quite definite on the point and requires that every flywheel and all exposed and dangerous machinery shall be kept securely fenced. Managers should bear in mind that the mere posting of a notice or issuing of instructions, prohibiting the oiling of machinery in motion, are not enough. Machinery cannot be kept securely fenced by a notice or an instruction. The fencing should be such as not only to guard against normal risks but, also, as far as possible, against the carelessness, ignorance and disobedience of workmen; and in some cases if proceedings were taken for infraction of posted notices or instructions, better discipline might be maintained.
|
|||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||